 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Fiber Optic LAN Components High Speed VCSEL 2.5Gbps HFE4090-321 FEATURES * Designed for drive currents between 5 and 15 mA * Optimized for low dependence of electrical properties over temperature www..com * High speed 1 GHz The HFE4090-321 is a high-performance 850 nm VCSEL (Vertical Cavity Surface-Emitting Laser) packaged for high-speed data communications. LASER RADIATION AVOID EXPOSURE TO BEAM CLASS 3B LASER PRODUCT The HFE4090-321 is a high radiance VCSEL designed to convert electrical current into optical power that can be used in fiber optic communications and other applications. As the current varies above threshold, the light intensity increases proportionally. The HFE4090-321 is designed to be used with inexpensive silicon or gallium arsenide detectors, but excellent performance can also be achieved with some indium gallium arsenide detectors. The low drive current requirement makes direct drive from PECL (Positive Emitter Coupled Logic) or EML (Emitter Coupled Logic) gates possible and eases driver design. The HFE4090-321 is designed to interface with 50/125 and 62.5/125 m multimode fiber. It produces circularly symmetric, non-astigmatic, narrow divergence beams that, with appropriate lensing, fiber couple all of the emitter power. Honeywell www.honeywell.com/sensing/VCSEL Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components High Speed VCSEL 2.5Gbps ABSOLUTE MAXIMUM RATINGS Parameter Storage Temperature Operating Temperature Lead Solder Temperature Laser Continuous Forward Current, Heat Sinked Laser Reverse Breakdown Voltage (IR=10 A) www..com HFE4090-321 Rating -40 to +100 C 0 to +70 C 260 C, 10 sec. 15 mA 5 V @ 10 A ELECTRO-OPTICAL CHARACTERISTICS (TA=25 oC unless otherwise stated) VCSEL Parameters Peak Operating Current Optical Power Output Threshold Current Threshold Current Temperature Variation Slope Efficiency Slope Efficiency Temperature variation Peak Wavelength P Temperature Variation Spectral Bandwidth, RMS Laser Forward Voltage Laser Reverse Voltage Rise and Fall Times Relative Intensity Noise Series Resistance Series Resistance Temperature Coefficient Beam Divergence Test Condition Adjustable to establish operating power IF=9mA TA = 0oC to 70oC Symbol Ipeak Po ITH ITH /T P P/T VF BVRLD tr tf RIN RS dRs/dT Min. Typ. 9 2.4 3 Max. 20 Units mA mW mA mA mW/mA PPM/ oC nm nm/oC 0.85 2.2 130 150 -122 40 nm V V ps dB/Hz Ohms PPM/ oC Degrees 5 4 Notes 1 1 2 3 1 -1.5 0.225 5 1.5 0.6 TA = 0 C to 70 C IF=9 mA IF=9 mA IF=9 mA IF=9 mA IR=10 A Prebias Above Threshold, 20%-80% 1 GHz BW, IF=9 mA IF=9 mA IF=9 mA, 0oC to 70oC o o 0.4 -6000 850 0.06 1.8 -10 830 860 18 -130 25 -3000 15 30 Notes: 1. Operating power is set by the peak operating current IPEAK=IBIAS+IMODULATION. 2. Operation at temperatures outside the specified range may result in the threshold current exceeding the maximums defined in the electro-optical characteristics table. 3. Slope efficiency is defined as Po/IF. 4. Rise and fall times are sensitive to drive electronics. Beam divergence is defined as the total included angle between the 1/e2 intensity points. Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com 2 Honeywell * www.honeywell.com/sensing/VCSEL For application help: call 1-800-537-6945 Fiber Optic Components High Speed VCSEL 2.5Gbps VCSEL HFE4090-321 NOTICE Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability. TYPICAL PERFORMANCE CURVES www..com Emitted Power vs. Current: Power varies approximately linearly with current above threshold. Threshold Current vs. Temperature: Threshold current varies parabolically with temperature; thus it can be nearly constant for a limited temperature range. Threshold Current Emitted Power Typica l I O P , P O P I TH = I M IN [1.1x 10 -4 (T-T M IN )2 + 1] T M IN , I M IN ITH Curre nt Te m pe ra ture Emission Intensity vs. Wavelength: Typical 10 mA spectrum comprises multiple lines corresponding to multiple transverse modes. NOTICE The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESDinduced damage and/or degradation to equipment, take normal ESD precautions when handling this product. DANGER Emission Intensity FW HM of e nve lope typica lly < 0.5 nm The VCSEL is a class IIIb laser and should be treated as a potential eye hazard. Due to the size of the component, the applicable warning logotype, aperture label, and certification/ identification label cannot be placed on the component itself. These labels can be found on the individual envelope in which the VCSEL unit is packaged, or attached to the shipping package. W a ve le ngth Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com For application help: call 1-800-537-6945 www.honeywell.com/sensingVCSEL Honeywell * 3 Fiber Optic LAN Components High Speed VCSEL 2.5Gbps VCSEL ORDER GUIDE Catalog Listing HFE4090-321 Description Unattenuated VCSEL TO-46 component HFE4090-321 MOUNTING DIMENSIONS (for reference only): in./(mm) SALES AND SERVICE Honeywell Sensing and Control serves its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact a nearby sales office or call: TELEPHONE 1-800-367-6786 (USA) 1-800-737-3360 (Canada) +49 (0) 89 35813310 (Germany) +65-580-3312 (Singapore) +44 (0) 118 981 9511 (UK) www..com PINOUT HFE4090-321 Number Function 1 Cathode 2 Anode 3 Cathode 4 Case FAX 1-972-470-4326 (Customer Response Center) 1-972-470-4549 (Fax on demand) +49 (0) 89 3599971 (Germany) +65 445 3033 (Singapore) +44 (0) 118 981 7513 (UK) INTERNET http://www.honeywell.com/sensing/VCSEL info.sc@honeywell.com WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Commencing with the date of shipment, Honeywell's warranty runs for 18 months. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. While we provide application assistance, personally and through our literature, it is up to the customer to determine the suitability of the product in the application. Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. 7/6/01 Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 Printed with Soy Ink on 50% Recycled Paper 006694-1-EN IL50 GLO 797 Printed in USA Honeywell Inc. Optoelectronics Facility 830 East Arapaho Road Richardson, Texas 75081 Honeywell Control Systems Ltd. Zodiac House Calleva Park Aldermaston, Berkshire RG7 8HW England Helping You Control Your World Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components High Speed VCSEL 2.5Gbps HFE4090-341 FEATURES * Designed for drive currents between 3 and 12 mA average * Optimized for low dependence of electrical properties over temperature www..com * High speed 1 GHz The HFE4090-341 is a high-performance 850 nm VCSEL (Vertical Cavity Surface-Emitting Laser) packaged for high-speed data communications. LASER RADIATION AVOID EXPOSURE TO BEAM CLASS 3B LASER PRODUCT The HFE4090-341 is a high radiance VCSEL designed to convert electrical current into optical power that can be used in fiber optic communications and other applications. As the current varies above threshold, the light intensity increases proportionally. The HFE4090-341 is designed to be used with inexpensive silicon or gallium arsenide detectors, but excellent performance can also be achieved with some indium gallium arsenide detectors. The low drive current requirement makes direct drive from PECL (Positive Emitter Coupled Logic) or EML (Emitter Coupled Logic) gates possible and eases driver design. The HFE4090-341 is designed to interface with 50/125 and 62.5/125 m multimode fiber. It produces circularly symmetric, non-astigmatic, narrow divergence beams that, with appropriate lensing, fiber couple all of the emitter power. Honeywell www.honeywell.com/VCSEL Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components High Speed VCSEL 2.5Gbps ABSOLUTE MAXIMUM RATINGS Parameter Storage Temperature Operating Temperature Lead Solder Temperature Laser Continuous Forward Current, Heat Sinked Laser Reverse Breakdown Voltage (IR=10 A) www..com HFE4090-341 Rating -40 to +100 C 0 to +70 C 260 C, 10 sec. 12 mA 5 V @ 10 A ELECTRO-OPTICAL CHARACTERISTICS (TA=25 oC unless otherwise stated) VCSEL Parameters Peak Operating Current Optical Power Output Threshold Current Threshold Current Temperature Variation Slope Efficiency Slope Efficiency Temperature variation Peak Wavelength P Temperature Variation Spectral Bandwidth, RMS Laser Forward Voltage Laser Reverse Voltage Rise and Fall Times Relative Intensity Noise Series Resistance Series Resistance Temperature Coefficient Beam Divergence Test Condition Adjustable to establish operating power IF=7mA TA = 0oC to 70oC Symbol Ipeak Po ITH ITH /T P P/T VF BVRLD tr tf RIN RS dRs/dT Min. Typ. 10 2.0 2.0 Max. 15 Units mA mW mA mA mW/mA PPM/ oC nm nm/oC 0.85 2.2 130 150 -122 55 nm V V ps dB/Hz Ohms PPM/ oC Degrees 5 4 Notes 1 1 2 3 1 -1.5 0.225 3 1.5 0.6 TA = 0 C to 70 C IF=7 mA IF=7 mA IF=7 mA IF=7 mA IR=10 A Prebias Above Threshold, 20%-80% 1 GHz BW, IF=7 mA IF=7 mA IF=7 mA, 0oC to 70oC o o 0.4 -6000 850 0.06 1.8 -10 830 860 22 -130 35 -3000 15 30 Notes: 1. Operating power is set by the peak operating current IPEAK=IBIAS+IMODULATION. 2. Operation at temperatures outside the specified range may result in the threshold current exceeding the maximums defined in the electro-optical characteristics table. 3. Slope efficiency is defined as Po/IF. 4. Rise and fall times are sensitive to drive electronics. 5. Beam divergence is defined as the total included angle between the 1/e2 intensity points. Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com 2 Honeywell * www.honeywell.com/VCSEL For application help: call 1-800-537-6945 Fiber Optic Components High Speed VCSEL 2.5Gbps VCSEL HFE4090-341 NOTICE Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability. TYPICAL PERFORMANCE CURVES www..com Emitted Power vs. Current: Power varies approximately linearly with current above threshold. Threshold Current vs. Temperature: Threshold current varies parabolically with temperature; thus it can be nearly constant for a limited temperature range. Threshold Current Emitted Power Typica l I O P , P O P I TH = I M IN [1.1x 10 -4 (T-T M IN )2 + 1] T M IN , I M IN ITH Curre nt Te m pe ra ture Emission Intensity vs. Wavelength: Typical 10 mA spectrum comprises multiple lines corresponding to multiple transverse modes. NOTICE The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESDinduced damage and/or degradation to equipment, take normal ESD precautions when handling this product. DANGER Emission Intensity FW HM of e nve lope typica lly < 0.5 nm The VCSEL is a class IIIb laser and should be treated as a potential eye hazard. Due to the size of the component, the applicable warning logotype, aperture label, and certification/ identification label cannot be placed on the component itself. These labels can be found on the individual envelope in which the VCSEL unit is packaged, or attached to the shipping package. W a ve le ngth Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com For application help: call 1-800-537-6945 www.honeywell.com/VCSEL Honeywell * 3 Fiber Optic LAN Components High Speed VCSEL 2.5Gbps VCSEL ORDER GUIDE Catalog Listing HFE4090-341 Description Unattenuated VCSEL TO-46 component HFE4090-341 MOUNTING DIMENSIONS (for reference only): in./(mm) SALES AND SERVICE Honeywell Sensing and Control serves its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact a nearby sales office or call: TELEPHONE 1-800-367-6786 (USA) 1-800-737-3360 (Canada) +49 (0) 89 35813310 (Germany) +65-580-3312 (Singapore) +44 (0) 118 981 9511 (UK) www..com PINOUT HFE4090-341 Number Function 1 Cathode 2 Anode 3 Cathode 4 Case FAX 1-972-470-4326 (Customer Response Center) 1-972-470-4549 (Fax on demand) +49 (0) 89 3599971 (Germany) +65 445 3033 (Singapore) +44 (0) 118 981 7513 (UK) INTERNET http://www.honeywell.com/VCSEL VCSEL@honeywell.com WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Commencing with the date of shipment, Honeywell's warranty runs for 18 months. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. While we provide application assistance, personally and through our literature, it is up to the customer to determine the suitability of the product in the application. Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. 01/29/02 Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 Printed with Soy Ink on 50% Recycled Paper 006694-1-EN IL50 GLO 797 Printed in USA Honeywell Inc. Optoelectronics Facility 830 East Arapaho Road Richardson, Texas 75081 Honeywell Control Systems Ltd. Zodiac House Calleva Park Aldermaston, Berkshire RG7 8HW England Helping You Control Your World Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components High Speed VCSEL 2.5Gbps FEATURES * Designed for drive currents between 3 and 12 mA * Optimized for low dependence of electrical properties over temperature * High speed 1 GHz * Two different laser/ www..com photodiode polarities * Attenuating coating * Packaged with a photodetector HFE409x-341 LASER RADIATION AVOID EXPOSURE TO BEAM CLASS 3B LASER PRODUCT The HFE409x-341 is a high-performance 850 nm VCSEL (Vertical Cavity Surface-Emitting Laser) packaged for high-speed data communications. This product combines all the performance advantages of the VCSEL with a custom designed power monitor diode. The power monitor diode can be used with appropriate feedback control circuitry to set a maximum power level for each VCSEL. In addition, built-in power attenuation reduces the effective slope efficiency. These combined features simplify design for high data rate communication and eye safety. The HFE409x-341 is a high radiance VCSEL designed to convert electrical current into optical power that can be used in fiber optic communications and other applications. As the current varies above threshold, the light intensity increases proportionally. The HFE409x-341 is designed to be used with inexpensive silicon or gallium arsenide detectors, but excellent performance can also be achieved with some indium gallium arsenide detectors. The low drive current requirement makes direct drive from PECL (Positive Emitter Coupled Logic) or EML (Emitter Coupled Logic) gates possible and eases driver design. The HFE409x-341 is designed to interface with 50/125 and 62.5/125 m multimode fiber. They product circularly symmetric, non-astigmatic, narrow divergence beams that, with appropriate lensing, fiber couple all of the emmiter power. Honeywell www.honeywell.com/VCSEL Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components High Speed VCSEL 2.5Gbps ABSOLUTE MAXIMUM RATINGS Parameter Storage Temperature Operating Temperature Lead Solder Temperature Laser Diode Reverse Voltage (IR=10 A) Laser Continuous Forward Current, Heat-Sinked PIN Photodiode Forward Current Rating -40 to +100C 0 to +70C 260C, 10 sec. 5V 12 mA 10 mA HFE409x-341 NOTICE Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability. ELECTRO-OPTICAL www..com VCSEL Parameters CHARACTERISTICS (TA=25 oC unless otherwise stated) Test Condition Adjustable to establish operating power IF=7mA TA = 0 C to 70 C o o Symbol Ipeak Po ITH ITH /T P P/T VF BVRLD tr tf RIN RS dRs/dT Min. Typ. 10 0.8 1.8 Max. 15 Units mA mW mA mA mW/mA PPM/ oC nm nm/oC nm V V ps dB/Hz Ohms PPM/ oC Degrees Units mA %/ oC Notes 1 1 2 3 Peak Operating Current Optical Power Output Threshold Current Threshold Current Temperature Variation Slope Efficiency Slope Efficiency Temperature variation Peak Wavelength P Temperature Variation Spectral Bandwidth, RMS Laser Forward Voltage Laser Reverse Voltage Rise and Fall Times Relative Intensity Noise Series Resistance Series Resistance Temperature Coefficient Beam Divergence Photodiode Parameters Monitor Current Monitor current Temperature Variation Dark Current PD Reverse Voltage PD Capacitance 1 -1 0.08 2.5 1 0.25 TA = 0 C to 70 C IF=7 mA IF=7 mA IF=7 mA IF=7 mA IR=10 A Prebias Above Threshold, 20%-80% 1 GHz BW, IF=7 mA IF=7 mA IF=7 mA, 0oC to 70oC o o 0.14 -4500 850 0.06 1.8 -10 830 860 0.85 2.2 130 150 -122 50 4 22 -130 35 -3000 15 Min. Typ. 0.35 0.2 30 Max. 5 Notes Test Condition Po =0.8mW Po =0.8mW Po =0mW, VR=3V Po =0mW, IR=10 A VR=0V, Freq=1MHz VR=3V, Freq=1MHz Symbol IPD IPD/T ID BVRPD C 20 30 115 75 40 100 55 nA V pF 6 Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com 2 Honeywell * www.honeywell.com/VCSEL For application help: call 1-800-537-6945 Fiber Optic Components High Speed VCSEL 2.5Gbps VCSEL Notes: 1. Operating power is set by the peak operating current IPEAK=IBIAS+IMODULATION. 2. Operation at temperatures outside the specified range may result in the threshold current exceeding the maximums defined in the electrooptical characteristics table. 3. Slope efficiency is defined as Po/IF at a total power output of 0.8 mW. Slope efficiency is intentionally lowered to the values shown by optical attenuation. www..com 4. Rise and fall times are sensitive to drive electronics 5. Beam divergence is defined as the total included angle between the 1/e2 intensity points. Beam divergence HFE409x-341 varies between 15deg and 30deg depending upon operating conditions. 30deg is expected to be worst case divergence. It is recommended that the optics be design for an NA of 0.3. 6. To safeguard the VCSEL from current spike damage, short the VCSEL anode and cathode to each other during photodiode BVR verification testing. Additionally to safeguard the PIN photodiode, limit the photodiode reverse voltage in accordance with the absolute maximum rating. TYPICAL PERFORMANCE CURVES Emitted Power vs. Current: Power varies approximately linearly with current above threshold. Threshold Current vs. Temperature: Threshold current varies parabolically with temperature; thus it can be nearly constant for a limited temperature range. Threshold Current Emitted Power Typica l I O P , P O P I TH = I M IN [1.1x 10 -4 (T-T M IN )2 + 1] T M IN , I M IN ITH Curre nt Te m pe ra ture Emission Intensity vs. Wavelength: Typical 10 mA spectrum comprises multiple lines corresponding to multiple transverse modes. NOTICE The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESDinduced damage and/or degradation to equipment, take normal ESD precautions when handling this product. DANGER Emission Intensity FW HM of e nve lope typica lly < 0.5 nm The VCSEL is a class IIIb laser and should be treated as a potential eye hazard. Due to the size of the component, the applicable warning logotype, aperture label, and certification/ identification label cannot be placed on the component itself. These labels can be found on the individual envelope in which the VCSEL unit is packaged, or attached to the shipping package. W a ve le ngth Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com For application help: call 1-800-537-6945 www.honeywell.com/VCSEL Honeywell * 3 Fiber Optic LAN Components High Speed VCSEL 2.5Gbps VCSEL ORDER GUIDE Catalog Listing HFE4091-341 HFE4092-341 Description Attenuated VCSEL with Back Monitor Photodiode VCSEL Cathode Common Attenuated VCSEL with Back Monitor Photodiode VCSEL Anode Common TELEPHONE HFE409x-341 1-800-367-6786 (USA) 1-800-737-3360 (Canada) +49 (0) 89 35813310 (Germany) +65-580-3312 (Singapore) +44 (0) 118 981 9511 (UK) MOUNTING DIMENSIONS (for reference only): in./(mm) www..com FAX 1-972-470-4326 (Customer Response Center) 1-972-470-4549 (Fax on demand) +49 (0) 89 3599971 (Germany) +65 445 3033 (Singapore) +44 (0) 118 981 7513 (UK) INTERNET http://www.honeywell.com/VCSEL VCSEL@honeywell.com WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Commencing with the date of shipment, Honeywell's warranty runs for 18 months. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. While we provide application assistance, personally and through our literature, it is up to the customer to determine the suitability of the product in the application. Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. SALES AND SERVICE Honeywell Sensing and Control serves its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact a nearby sales office or call: 08/09/02 Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 Printed with Soy Ink on 50% Recycled Paper 006694-1-EN IL50 GLO 797 Printed in USA Honeywell Inc. Optoelectronics Facility 830 East Arapaho Road Richardson, Texas 75081 Honeywell Control Systems Ltd. Zodiac House Calleva Park Aldermaston, Berkshire RG7 8HW England Helping You Control Your World Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components High Speed VCSEL 2.5Gbps FEATURES * Designed for drive currents between 3 and 12 mA * Optimized for low dependence of electrical properties over temperature * High speed 1 GHz * Two different laser/ www..com photodiode polarities * Attenuating coating also available * Packaged with a photodetector HFE409x-342 The HFE409x-342 is a high-performance 850 nm VCSEL (Vertical Cavity Surface-Emitting Laser) packaged for high-speed data communications. This product combines all the performance advantages of the VCSEL with a custom designed power monitor diode, and is designed for ease of use by the module designer and manufacturer. The power monitor diode can be used with appropriate feedback control circuitry to set a maximum power level for each VCSEL, simplifying design for high data rate communication and eye safety. The HFE409x-342 is a high radiance VCSEL designed to convert electrical current into optical power that can be used in fiber optic communications and other applications. As the current varies above threshold, the light intensity increases proportionally. The HFE409x-342 is designed to be used with inexpensive silicon or gallium arsenide detectors, but excellent performance can also be achieved with some indium gallium arsenide detectors. The low drive current requirement makes direct drive from PECL (Positive Emitter Coupled Logic) or EML (Emitter Coupled Logic) gates possible and eases driver design. The HFE409x-342 is designed to interface with 50/125 and 62.5/125 m multimode fiber. It produces a circularly symmetric, non-astigmatic, narrow divergence beams that, with appropriate lensing, fiber couple all of the emitter power. LASER RADIATION AVOID EXPOSURE TO BEAM CLASS 3B LASER PRODUCT Honeywell www.honeywell.com/VCSEL Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components High Speed VCSEL 2.5Gbps ABSOLUTE MAXIMUM RATINGS Parameter Storage Temperature Operating Temperature Lead Solder Temperature Laser Diode Reverse Voltage (IR=10 A) Laser Continuous Forward Current, Heat-Sinked PIN Photodiode Forward Current Rating -40 to +100C 0 to +70C 260C, 10 sec. 5V 12 mA 10 mA HFE409x-342 NOTICE Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability. ELECTRO-OPTICAL www..com VCSEL Parameters CHARACTERISTICS (TA=25 oC unless otherwise stated) Test Condition Adjustable to establish operating power IF=7mA TA = 0 C to 70 C o o Symbol Ipeak Po ITH ITH /T P P/T VF BVRLD tr tf RIN RS dRs/dT Min. Typ. 10 2 1.8 Max. 15 Units mA mW mA mA mW/mA PPM/ oC nm nm/oC nm V V ps dB/Hz Ohms PPM/ oC Degrees Units mA %/ oC Notes 1 1 2 3 Peak Operating Current Optical Power Output Threshold Current Threshold Current Temperature Variation Slope Efficiency Slope Efficiency Temperature variation Peak Wavelength P Temperature Variation Spectral Bandwidth, RMS Laser Forward Voltage Laser Reverse Voltage Rise and Fall Times Relative Intensity Noise Series Resistance Series Resistance Temperature Coefficient Beam Divergence Photodiode Parameters Monitor Current Monitor current Temperature Variation Dark Current PD Reverse Voltage PD Capacitance 1 -1 0.225 2.5 1 0.6 TA = 0 C to 70 C IF=7 mA IF=7 mA IF=7 mA IF=7 mA IR=10 A Prebias Above Threshold, 20%-80% 1 GHz BW, IF=7 mA IF=7 mA IF=7 mA, 0oC to 70oC o o 0.4 -4500 850 0.06 1.8 -10 830 860 0.85 2.2 130 150 -122 50 4 22 -130 35 -3000 15 Min. Typ. 0.075 0.2 30 Max. 5 Notes Test Condition Po =2.0mW Po =2.0mW Po =0mW, VR=3V Po =0mW, IR=10 A VR=0V, Freq=1MHz VR=3V, Freq=1MHz Symbol IPD IPD/T ID BVRPD C 20 30 115 75 40 100 55 nA V pF 6 Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com 2 Honeywell * www.honeywell.com/VCSEL For application help: call 1-800-537-6945 Fiber Optic Components High Speed VCSEL 2.5Gbps VCSEL Notes: 1. Operating power is set by the peak operating current IPEAK=IBIAS+IMODULATION. 2. Operation at temperatures outside the specified range may result in the threshold current exceeding the maximums defined in the electrooptical characteristics table. 3. Slope efficiency is defined as Po/IF at a total power output of 2.0 mW. 4. Rise and fall times are sensitive to drive electronics www..com 5. Beam divergence is defined as the total included angle between the 1/e2 intensity points. Beam divergence HFE409x-342 varies between 15deg and 30deg depending upon operating conditions. 30deg is expected to be worst case divergence. It is recommended that the optics be design for an NA of 0.3 6. To safeguard the VCSEL from current spike damage, short the VCSEL anode and cathode to each other during photodiode BVR verification testing. Additionally to safeguard the PIN photodiode, limit the photodiode reverse voltage in accordance with the absolute maximum rating. TYPICAL PERFORMANCE CURVES Emitted Power vs. Current: Power varies approximately linearly with current above threshold. Threshold Current vs. Temperature: Threshold current varies parabolically with temperature; thus it can be nearly constant for a limited temperature range. Threshold Current Emitted Power Typica l I O P , P O P I TH = I M IN [1.1x 10 -4 (T-T M IN )2 + 1] T M IN , I M IN ITH Curre nt Te m pe ra ture Emission Intensity vs. Wavelength: Typical 10 mA spectrum comprises multiple lines corresponding to multiple transverse modes. NOTICE The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESDinduced damage and/or degradation to equipment, take normal ESD precautions when handling this product. DANGER Emission Intensity FW HM of e nve lope typica lly < 0.5 nm The VCSEL is a class IIIb laser and should be treated as a potential eye hazard. Due to the size of the component, the applicable warning logotype, aperture label, and certification/ identification label cannot be placed on the component itself. These labels can be found on the individual envelope in which the VCSEL unit is packaged, or attached to the shipping package. W a ve le ngth Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com For application help: call 1-800-537-6945 www.honeywell.com/VCSEL Honeywell * 3 Fiber Optic LAN Components High Speed VCSEL 2.5Gbps VCSEL ORDER GUIDE Catalog Listing HFE4093-342 HFE4094-342 Description Unattenuated VCSEL with Back Monitor Photodiode VCSEL Anode Common Unattenuated VCSEL with Back Monitor Photodiode VCSEL Cathode Common TELEPHONE HFE409x-342 1-800-367-6786 (USA) 1-800-737-3360 (Canada) +49 (0) 89 35813310 (Germany) +65-580-3312 (Singapore) +44 (0) 118 981 9511 (UK) MOUNTING DIMENSIONS (for reference only): in./(mm) www..com FAX 1-972-470-4326 (Customer Response Center) 1-972-470-4549 (Fax on demand) +49 (0) 89 3599971 (Germany) +65 445 3033 (Singapore) +44 (0) 118 981 7513 (UK) INTERNET http://www.honeywell.com/VCSEL VCSEL@honeywell.com WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Commencing with the date of shipment, Honeywell's warranty runs for 18 months. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. While we provide application assistance, personally and through our literature, it is up to the customer to determine the suitability of the product in the application. Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. SALES AND SERVICE Honeywell Sensing and Control serves its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact a nearby sales office or call: 08/09/02 Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 Printed with Soy Ink on 50% Recycled Paper 006694-1-EN IL50 GLO 797 Printed in USA Honeywell Inc. Optoelectronics Facility 830 East Arapaho Road Richardson, Texas 75081 Honeywell Control Systems Ltd. Zodiac House Calleva Park Aldermaston, Berkshire RG7 8HW England Helping You Control Your World Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic Components GaAs 850 nm VCSEL ABSOLUTE MAXIMUM RATINGS Parameter Storage Temperature Operating Temperature Lead Solder Temperature Laser Continuous Forward Current, Heat Sinked Laser Reverse Breakdown Voltage (IR=10 A) www..com HFE4080-321 Rating -40 to +100 C 0 to +70 C 260 C, 10 sec. 15 mA 5 V @ 10 A ELECTRO-OPTICAL CHARACTERISTICS (TA=25 oC unless otherwise stated) VCSEL Parameters Peak Operating Current Optical Power Output Threshold Current Threshold Current Temperature Variation Slope Efficiency Slope Efficiency Temperature variation Peak Wavelength P Temperature Variation Spectral Bandwidth, RMS Laser Forward Voltage Laser Reverse Voltage Rise and Fall Times Relative Intensity Noise Series Resistance Beam Divergence Test Condition Adjustable to establish operating power IF=12mA TA = 0 C to 70 C Po =1.3mW TA = 0 C to 70 C IF=12mA IF=12mA IF=12mA IF=12 mA IR=10 A Prebias Above Threshold, 20%-80% 1 GHz BW, IF=12mA IF=12 mA IF=12 mA o o o o Symbol Ipeak Po ITH ITH /T P P/T VF BVRLD tr/tf RIN RS Min. Typ. 12 Max. 20 3.6 6 1.5 0.4 Units mA mW mA mA mW/mA %/ C o Notes 1 1 2 3 0.9 1.5 -1.5 0.1 1.8 3.5 0.25 -0.5 830 850 0.06 860 0.85 nm nm/ C nm V V ps dB/Hz Ohms Degrees 4 o 1.6 5 1.8 10 100 -128 25 15 2.2 300 -122 40 20 18 5 5 Notes: 1. Operating power is set by the peak operating current IPEAK=IBIAS+IMODULATION. 2. Operation at temperatures outside the specified range may result in the threshold current exceeding the maximums defined in the electro-optical characteristics table. 3. Slope efficiency is defined as Po/IF at a total power output of 1.3 mW. 4. Rise and fall times are sensitive to drive electronics, 200ps rise and fall times are achievable with Honeywell VCSELs. 2 5. Beam divergence is defined as the total included angle between the 1/e intensity points. For application help: call 1-800-537-6945 Honeywell * MICRO SWITCH Sensing and Control 1 Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components High Speed VCSEL 1.25Gbps HFE408x-321 FEATURES * Designed for drive currents between 5 and 15 mA * Optimized for low dependence of electrical properties over temperature www..com * High speed 1 GHz * Two different laser/ photodiode polarities * Attenuating coating * Packaged with a photodetector LASER RADIATION AVOID EXPOSURE TO BEAM CLASS 3B LASER PRODUCT The HFE408x-321 is a high-performance 850 nm VCSEL (Vertical Cavity Surface-Emitting Laser) packaged for high-speed data communications. This product combines all the performance advantages of the VCSEL with a custom designed power monitor diode. The power monitor diode can be used with appropriate feedback control circuitry to set a maximum power level for each VCSEL. In addition, built-in power attenuation reduces the effective slope efficiency. These combined features simplify design for high data rate communication and eye safety. The HFE408x-321 is a high radiance VCSEL designed to convert electrical current into optical power that can be used in fiber optic communications and other applications. As the current varies above threshold, the light intensity increases proportionally. The HFE408x-321 is designed to be used with inexpensive silicon or gallium arsenide detectors, but excellent performance can also be achieved with some indium gallium arsenide detectors. The low drive current requirement makes direct drive from PECL (Positive Emitter Coupled Logic) or EML (Emitter Coupled Logic) gates possible and eases driver design. The HFE408x-321 is designed to interface with 50/125 and 62.5/125 m multimode fiber. They product circularly symmetric, non-astigmatic, narrow divergence beams that, with appropriate lensing, fiber couple all of the emitter power. Honeywell www.honeywell.com/sensing/VCSEL Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components High Speed VCSEL 1.25Gbps ABSOLUTE MAXIMUM RATINGS Parameter Storage Temperature Operating Temperature Lead Solder Temperature Continuous Optical Output Power (Any Current) Laser Diode Reverse Voltage (IR=10 A) Laser Continuous Forward Current, Heat-Sinked PIN Photodiode Forward Current www..com HFE408x-321 Rating -40 to +125C 0 to +70C 260C, 10 sec. 5 mW 5V 15 mA 10 mA NOTICE Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability. ELECTRO-OPTICAL CHARACTERISTICS (TA=25 oC unless otherwise stated) VCSEL Parameters Peak Operating Current Optical Power Output Threshold Current Threshold Current Temperature Variation Slope Efficiency Slope Efficiency Temperature variation Peak Wavelength P Temperature Variation Spectral Bandwidth, RMS Laser Forward Voltage Laser Reverse Voltage Rise and Fall Times Relative Intensity Noise Series Resistance Beam Divergence Photodiode Parameters Monitor Current Monitor current Temperature Variation Dark Current PD Reverse Voltage PD Capacitance Test Condition Adjustable to establish operating power IF=12mA TA = 0oC to 70oC Po =0.5mW TA = 0oC to 70oC IF=12mA IF=12mA IF=12mA IF=12 mA IR=10 A Prebias Above Threshold, 20%-80% 1 GHz BW, IF=12mA IF=12 mA IF=12 mA Test Condition Po =0.5mW Po =0.5mW Po =0mW, VR=3V Po =0mW, IR=10 A VR=0V, Freq=1MHz VR=3V, Freq=1MHz Symbol Ipeak Po ITH ITH /T P P/T VF BVRLD tr tf RIN RS Symbol IPD IPD/T ID BVRPD C 1.6 5 0.3 1.5 -1.5 0.04 Min. Typ. 12 0.6 3.5 Max. 20 1.2 6 1.5 0.16 Units mA mW mA mA mW/mA %/ oC nm nm/oC 0.85 2.2 300 300 -122 40 20 Max. 0.250 0.2 20 30 115 75 40 100 55 nm V V ps dB/Hz Ohms Degrees Units mA %/ oC nA V pF 4 Notes 1 1 2 3 0.1 -0.5 850 0.06 1.8 10 150 200 -128 25 15 Typ. 830 860 18 5 Min. 0.075 5 Notes 6 Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com 2 Honeywell * www.honeywell.com/sensing/VCSEL For application help: call 1-800-537-6945 Fiber Optic Components High Speed VCSEL 1.25Gbps Notes: 1. Operating power is set by the peak operating current IPEAK=IBIAS+IMODULATION. 2. Operation at temperatures outside the specified range may result in the threshold current exceeding the maximums defined in the electrooptical characteristics table. 3. Slope efficiency is defined as Po/IF at a total power output of 0.5 mW. Slope efficiency is intentionally lowered to the values shown by optical attenuation. HFE408x-321 www..com 4. Rise and fall times are sensitive to drive electronics, 200ps rise and fall times are achievable with Honeywell VCSELs. 5. Beam divergence is defined as the total included angle between the 1/e2 intensity points. 6. To safeguard the VCSEL from current spike damage, short the VCSEL anode and cathode to each other during photodiode BVR verification testing. Additionally to safeguard the PIN photodiode, limit the photodiode reverse voltage in accordance with the absolute maximum rating. TYPICAL PERFORMANCE CURVES Emitted Power vs. Current: Power varies approximately linearly with current above threshold. Threshold Current vs. Temperature: Threshold current varies parabolically with temperature; thus it can be nearly constant for a limited temperature range. Threshold Current Emitted Power Typica l I O P , P O P I TH = I M IN [1.1x 10 -4 (T-T M IN )2 + 1] T M IN , I M IN ITH Curre nt Te m pe ra ture Emission Intensity vs. Wavelength: Typical 10 mA spectrum comprises multiple lines corresponding to multiple transverse modes. NOTICE The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESDinduced damage and/or degradation to equipment, take normal ESD precautions when handling this product. DANGER Emission Intensity FW HM of e nve lope typica lly < 0.5 nm The VCSEL is a class IIIb laser and should be treated as a potential eye hazard. Due to the size of the component, the applicable warning logotype, aperture label, and certification/ identification label cannot be placed on the component itself. These labels can be found on the individual envelope in which the VCSEL unit is packaged, or attached to the shipping package. W a ve le ngth Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com For application help: call 1-800-537-6945 www.honeywell.com/sensingVCSEL Honeywell * 3 Fiber Optic LAN Components High Speed VCSEL 1.25Gbps VCSEL ORDER GUIDE Catalog Listing HFE4081-321 HFE4082-321 Description Attenuated VCSEL with Back Monitor Photodiode VCSEL Cathode Common Attenuated VCSEL with Back Monitor Photodiode VCSEL Anode Common HFE408x-321 While we provide application assistance, personally and through our literature, it is up to the customer to determine the suitability of the product in the application. Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. SALES AND SERVICE Honeywell Sensing and Control serves its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact a nearby sales office or call: TELEPHONE 1-800-367-6786 (USA) 1-800-737-3360 (Canada) +49 (0) 89 35813310 (Germany) +65-580-3312 (Singapore) +44 (0) 118 981 9511 (UK) MOUNTING DIMENSIONS (for reference only): in./(mm) www..com DIMENSION A = 0.0780.004 PINOUT HFE4082-321 Number Function 1 KLD 2 KPD, ALD 3 APD HFE4081-321 Number Function 1 ALD 2 KLD, APD 3 KPD FAX 1-972-470-4326 (Customer Response Center) 1-972-470-4549 (Fax on demand) +49 (0) 89 3599971 (Germany) +65 445 3033 (Singapore) +44 (0) 118 981 7513 (UK) INTERNET http://www.honeywell.com/sensing/VCSEL info.sc@honeywell.com PINOUT DEFINITIONS ALD KLD VCSEL Anode VCSEL Cathode APD KPD Monitor Photodiode Anode Monitor Photodiode Cathode WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Commencing with the date of shipment, Honeywell's warranty runs for 18 months. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. 02/19/02 Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 Printed with Soy Ink on 50% Recycled Paper 006694-1-EN IL50 GLO 797 Printed in USA Honeywell Inc. Optoelectronics Facility 830 East Arapaho Road Richardson, Texas 75081 Honeywell Control Systems Ltd. Zodiac House Calleva Park Aldermaston, Berkshire RG7 8HW England Helping You Control Your World Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components High Speed VCSEL 1.25Gbps HFE408x-322 FEATURES * Designed for drive currents between 5 and 15 mA * Optimized for low dependence of electrical properties over temperature www..com * High speed 1 GHz * Two different laser/ photodiode polarities * Attenuating coating also available * Packaged with a photodetector The HFE408x-322 is a high-performance 850 nm VCSEL (Vertical Cavity Surface-Emitting Laser) packaged for high-speed data communications. This product combines all the performance advantages of the VCSEL with a custom designed power monitor diode, and is designed for ease of use by the module designer and manufacturer. The power monitor diode can be used with appropriate feedback control circuitry to set a maximum power level for each VCSEL, simplifying design for high data rate communication and eye safety. The HFE408x-322 is a high radiance VCSEL designed to convert electrical current into optical power that can be used in fiber optic communications and other applications. As the current varies above threshold, the light intensity increases proportionally. The HFE408x-322 is designed to be used with inexpensive silicon or gallium arsenide detectors, but excellent performance can also be achieved with some indium gallium arsenide detectors. The low drive current requirement makes direct drive from PECL (Positive Emitter Coupled Logic) or EML (Emitter Coupled Logic) gates possible and eases driver design. The HFE408x-322 is designed to interface with 50/125 and 62.5/125 m multimode fiber. They product circularly symmetric, non-astigmatic, narrow divergence beams that, with appropriate lensing, fiber couple all of the emitter power. LASER RADIATION AVOID EXPOSURE TO BEAM CLASS 3B LASER PRODUCT Honeywell www.honeywell.com/sensing/VCSEL Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components High Speed VCSEL 1.25Gbps ABSOLUTE MAXIMUM RATINGS Parameter Storage Temperature Operating Temperature Lead Solder Temperature Continuous Optical Output Power (Any Current) Laser Diode Reverse Voltage (IR=10 A) Laser Continuous Forward Current, Heat-Sinked PIN Photodiode Forward Current www..com HFE408x-322 Rating -40 to +125C 0 to +70C 260C, 10 sec. 5 mW 5V 15 mA 10 mA NOTICE Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability. ELECTRO-OPTICAL CHARACTERISTICS (TA=25 oC unless otherwise stated) VCSEL Parameters Peak Operating Current Optical Power Output Threshold Current Threshold Current Temperature Variation Slope Efficiency Slope Efficiency Temperature variation Peak Wavelength P Temperature Variation Spectral Bandwidth, RMS Laser Forward Voltage Laser Reverse Voltage Rise and Fall Times Relative Intensity Noise Series Resistance Beam Divergence Photodiode Parameters Monitor Current Monitor current Temperature Variation Dark Current PD Reverse Voltage PD Capacitance Test Condition Adjustable to establish operating power IF=12mA TA = 0 C to 70 C Po =1.3mW TA = 0 C to 70 C IF=12mA IF=12mA IF=12mA IF=12 mA IR=10 A Prebias Above Threshold, 20%-80% 1 GHz BW, IF=12mA IF=12 mA IF=12 mA Test Condition Po =1.3mW Po =1.3mW Po =0mW, VR=3V Po =0mW, IR=10 A VR=0V, Freq=1MHz VR=3V, Freq=1MHz o o o o Symbol Ipeak Po ITH ITH /T P P/T VF BVRLD tr tf RIN RS Symbol IPD IPD/T ID BVRPD C Min. Typ. 12 Max. 20 3.6 6 1.5 0.4 Units mA mW mA mA mW/mA %/ C o Notes 1 1 2 3 0.9 1.5 -1.5 0.1 1.8 3.5 0.25 -0.5 830 850 0.06 860 0.85 2.2 300 300 -122 40 20 Max. 0.056 nm nm/oC nm V V ps dB/Hz Ohms Degrees Units mA %/ oC 4 1.6 5 1.8 10 150 200 -128 25 15 Typ. 0.2 18 5 Min. 0.015 5 Notes 20 30 115 75 40 100 55 nA V pF 6 Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com 2 Honeywell * www.honeywell.com/sensing/VCSEL For application help: call 1-800-537-6945 Fiber Optic Components High Speed VCSEL 1.25Gbps Notes: 1. Operating power is set by the peak operating current IPEAK=IBIAS+IMODULATION. 2. Operation at temperatures outside the specified range may result in the threshold current exceeding the maximums defined in the electrooptical characteristics table. 3. Slope efficiency is defined as Po/IF at a total power output of 1.3 mW. 4. Rise and fall times are sensitive to drive electronics, www..com 200ps rise and fall times are achievable with Honeywell VCSELs. HFE408x-322 5. Beam divergence is defined as the total included angle between the 1/e2 intensity points. 6. To safeguard the VCSEL from current spike damage, short the VCSEL anode and cathode to each other during photodiode BVR verification testing. Additionally to safeguard the PIN photodiode, limit the photodiode reverse voltage in accordance with the absolute maximum rating. TYPICAL PERFORMANCE CURVES Emitted Power vs. Current: Power varies approximately linearly with current above threshold. Threshold Current vs. Temperature: Threshold current varies parabolically with temperature; thus it can be nearly constant for a limited temperature range. Threshold Current Emitted Power Typica l I O P , P O P I TH = I M IN [1.1x 10 -4 (T-T M IN )2 + 1] T M IN , I M IN ITH Curre nt Te m pe ra ture Emission Intensity vs. Wavelength: Typical 10 mA spectrum comprises multiple lines corresponding to multiple transverse modes. NOTICE The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESDinduced damage and/or degradation to equipment, take normal ESD precautions when handling this product. DANGER Emission Intensity FW HM of e nve lope typica lly < 0.5 nm The VCSEL is a class IIIb laser and should be treated as a potential eye hazard. Due to the size of the component, the applicable warning logotype, aperture label, and certification/ identification label cannot be placed on the component itself. These labels can be found on the individual envelope in which the VCSEL unit is packaged, or attached to the shipping package. W a ve le ngth Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com For application help: call 1-800-537-6945 www.honeywell.com/sensingVCSEL Honeywell * 3 Fiber Optic LAN Components High Speed VCSEL 1.25Gbps VCSEL ORDER GUIDE Catalog Listing HFE4083-322 HFE4084-322 Description Unattenuated VCSEL with Back Monitor Photodiode VCSEL Anode Common Unattenuated VCSEL with Back Monitor Photodiode VCSEL Cathode Common HFE408x-322 Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. SALES AND SERVICE Honeywell Sensing and Control serves its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact a nearby sales office or call: TELEPHONE 1-800-367-6786 (USA) 1-800-737-3360 (Canada) +49 (0) 89 35813310 (Germany) +65-580-3312 (Singapore) +44 (0) 118 981 9511 (UK) MOUNTING DIMENSIONS (for reference only): in./(mm) www..com DIMENSION A = 0.0780.004 PINOUT HFE4083-322 Number Function 1 KLD 2 KPD, ALD 3 APD HFE4084-322 Number Function 1 ALD 2 KLD, APD 3 KPD FAX 1-972-470-4326 (Customer Response Center) 1-972-470-4549 (Fax on demand) +49 (0) 89 3599971 (Germany) +65 445 3033 (Singapore) +44 (0) 118 981 7513 (UK) INTERNET http://www.honeywell.com/sensing/VCSEL info.sc@honeywell.com PINOUT DEFINITIONS ALD KLD VCSEL Anode VCSEL Cathode APD KPD Monitor Photodiode Anode Monitor Photodiode Cathode WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Commencing with the date of shipment, Honeywell's warranty runs for 18 months. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. While we provide application assistance, personally and through our literature, it is up to the customer to determine the suitability of the product in the application. 7/6/01 Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 Printed with Soy Ink on 50% Recycled Paper 006694-1-EN IL50 GLO 797 Printed in USA Honeywell Inc. Optoelectronics Facility 830 East Arapaho Road Richardson, Texas 75081 Honeywell Control Systems Ltd. Zodiac House Calleva Park Aldermaston, Berkshire RG7 8HW England Helping You Control Your World Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic Components GaAs 850 nm VCSEL ABSOLUTE MAXIMUM RATINGS Parameter Storage Temperature Operating Temperature Lead Solder Temperature Laser Continuous Forward Current, Heat Sinked Laser Reverse Breakdown Voltage (IR=10 A) www..com HFE4085-321 Rating -40 to +100 C 0 to +70 C 260 C, 10 sec. 15 mA 5 V @ 10 A ELECTRO-OPTICAL CHARACTERISTICS (TA=25 oC unless otherwise stated) VCSEL Parameters Peak Operating Current Optical Power Output Threshold Current Threshold Current Temperature Variation Slope Efficiency Slope Efficiency Temperature variation Peak Wavelength P Temperature Variation Spectral Bandwidth, RMS Laser Forward Voltage Laser Reverse Voltage Rise and Fall Times Relative Intensity Noise Series Resistance Beam Divergence Test Condition Adjustable to establish operating power IF=12mA TA = 0 C to 70 C Po =1.3mW TA = 0 C to 70 C IF=12mA IF=12mA IF=12mA IF=12 mA IR=10 A Prebias Above Threshold, 20%-80% 1 GHz BW, IF=10mA IF=12 mA IF=12 mA o o o o Symbol Ipeak Po ITH ITH /T P P/T VF BVRLD tr/tf RIN RS Min. Typ. 12 Max. 20 3.6 6 1.5 0.4 Units mA mW mA mA mW/mA %/ C o Notes 1 1 2 3 0.9 1.5 -1.5 0.1 1.8 3.5 0.25 -0.5 830 850 0.06 860 0.85 nm nm/ C nm V V ps dB/Hz Ohms Degrees 4 o 1.6 5 1.8 10 100 -128 25 15 2.2 300 -122 40 20 18 5 5 Notes: 1. Operating power is set by the peak operating current IPEAK=IBIAS+IMODULATION. 2. Operation at temperatures outside the specified range may result in the threshold current exceeding the maximums defined in the electro-optical characteristics table. 3. Slope efficiency is defined as Po/IF at a total power output of 1.3 mW. 4. Rise and fall times are sensitive to drive electronics, 200ps rise and fall times are achievable with Honeywell VCSELs. 2 5. Beam divergence is defined as the total included angle between the 1/e intensity points. For application help: call 1-800-537-6945 Honeywell * MICRO SWITCH Sensing and Control 1 Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic Components GaAs 850 nm VCSEL ABSOLUTE MAXIMUM RATINGS Parameter Storage Temperature Operating Temperature Lead Solder Temperature Laser Continuous Forward Current, Heat Sinked Laser Reverse Breakdown Voltage (IR=10 A) PIN Photodiode reverse voltage www..com HFE4086-001 Rating -40 to +100 C 0 to +70 C 260 C, 10 sec. 15 mA 5 V @ 10 A 30V ELECTRO-OPTICAL CHARACTERISTICS (TA=25 oC unless otherwise stated) VCSEL Parameters Peak Operating Current Optical Power Output Threshold Current Threshold Current Temperature Variation Slope Efficiency Slope Efficiency Temperature variation Peak Wavelength P Temperature Variation Spectral Bandwidth, RMS Laser Forward Voltage Laser Reverse Voltage Rise and Fall Times Relative Intensity Noise Series Resistance Beam Divergence Test Condition Adjustable to establish operating power IF=12mA TA = 0 C to 70 C Po =1.3mW TA = 0 C to 70 C IF=12mA IF=12mA IF=12mA IF=12 mA IR=10 A Prebias Above Threshold, 20%-80% 1 GHz BW, IF=12mA IF=12 mA IF=12 mA o o o o Symbol Ipeak Po ITH ITH /T P P/T VF BVRLD tr/tf RIN RS Min. Typ. 12 Max. 20 3.6 6 1.5 0.4 Units mA mW mA mA mW/mA %/ C o Notes 1 1 2 3 0.9 1.5 -1.5 0.1 1.8 3.5 0.25 -0.5 830 850 0.06 860 0.85 nm nm/ C nm V V ps dB/Hz Ohms Degrees 4 o 1.6 5 1.8 10 100 -128 25 15 2.2 300 -122 40 20 18 5 5 Notes: 1. Operating power is set by the peak operating current IPEAK=IBIAS+IMODULATION. 2. Operation at temperatures outside the specified range may result in the threshold current exceeding the maximums defined in the electro-optical characteristics table. 3. Slope efficiency is defined as Po/IF at a total power output of 1.3 mW. 4. Rise and fall times are sensitive to drive electronics, 200ps rise and fall times are achievable with Honeywell VCSELs. 2 5. Beam divergence is defined as the total included angle between the 1/e intensity points. For application help: call 1-800-537-6945 Honeywell * MICRO SWITCH Sensing and Control 1 Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components HFE419x-521 LC Connectorized High Speed VCSEL 2.5 Gbps FEATURES * Designed for small form factor transceivers * Prealigned connector sleeve that is compatible with the LC standard (LC is a trademark of www..com Lucent Technologies) * Designed for drive currents * Optimized for low dependence of electrical properties over temperature * High speed 1 GHz * Two different laser/ photodiode polarities * Attenuating coating * Packaged with a photodetector The HFE419x-521 is a high-performance 850 nm VCSEL (Vertical Cavity Surface-Emitting Laser) packaged for high-speed data communications. This product combines all the performance advantages of the VCSEL with a custom designed power monitor diode. The power monitor diode can be used with appropriate feedback control circuitry to set a maximum power level for each VCSEL. In addition, built-in power attenuation reduces the effective slope efficiency. These combined features simplify design for high data rate communication and eye safety. Packaged in a fiber receptacle sleeve, this high radiance VCSEL is designed to convert electrical current into optical power that can be used in fiber optic communications and other applications. As the current varies above threshold, the light intensity increases proportionally. The HFE419x-521 is designed to be used with inexpensive silicon or gallium arsenide detectors, but excellent performance can also be achieved with some indium gallium arsenide detectors. The low drive current requirement makes direct drive from PECL (Positive Emitter Coupled Logic) or EML (Emitter Coupled Logic) gates possible and eases driver design. The HFE419x-521 is a prealigned and focused fiber optic transmitter designed to interface with 50/125 and 62.5/125 m multimode fiber. LASER RADIATION AVOID EXPOSURE TO BEAM CLASS 3B LASER PRODUCT Honeywell www.honeywell.com/sensing/VCSEL Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components LC Connectorized VCSEL 2.5Gbps ABSOLUTE MAXIMUM RATINGS Parameter Storage Temperature Operating Temperature Lead Solder Temperature Continuous Optical Output Power (Any Current) Laser Diode Reverse Voltage (IR=10 A) Laser Continuous Forward Current, Heat-Sinked PIN Photodiode Forward Current www..com HFE419x-521 Rating -40 to +85C 0 to +70C 260C, 10 sec. 5 mW 5V 15 mA 10 mA NOTICE Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability. ELECTRO-OPTICAL CHARACTERISTICS (TA=25 oC unless otherwise stated) VCSEL Parameters Peak Fiber Coupled Optical Power (See threshold current and slope efficiency which control power output) Threshold Current Threshold Current Temperature Variation Slope Efficiency Slope Efficiency Temperature Variation Peak Wavelength P Temp Coefficient Spectral Bandwidth Laser Forward Voltage Laser Reverse Voltage Rise and Fall Time Relative Intensity Noise Series Resistance Series Resistance Temperature Coefficient Photodiode Parameters Monitor Current Monitor Current Temperature Variation Dark Current PD Reverse Voltage PD Capacitance Test Condition IF=9 mA Peak 50/125 m fiber NA=0.20 Symbol POC Min. Typ. 350 Max. Units W Notes 1 ITH TA = 0oC to 70oC POC=0.5 mW TA = 0oC to 70oC IF=9 mA IF=9 mA IF=9 mA, FWHM IF=9 mA IR=10 A Bias Above Threshold (20%-80%) 1 GHz BW IF=9 mA IF=9 mA, 0oC to 70oC ITH /T P P/T VF BVRLD tR tF RIN RS dRs/dT 1 -1.5 0.028 3 5 1.5 0.14 mA mA mW/mA PPM/ oC 2 3 -6000 830 850 0.06 0.85 1.8 -10 2.2 130 150 -122 40 860 nm nm/ oC nm V V ps dB/Hz Ohms PPM/oC 4 18 -130 25 -3000 Test Condition POC=0.5 mW POC=0.5 mW Po=0 mW, VR=3 V Po=0 mW, IR=10 A VR=0 V, Freq=1 MHz VR=3 V, Freq=1 MHz Symbol IPD IPD/T ID BVRPD C Min. Typ. 0.42 0.2 Max. Units mA %/ oC nA V pF Notes 20 30 115 75 40 100 55 5 Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com 2 Honeywell * www.honeywell.com/sensing/VCSEL For application help: call 1-800-537-6945 Fiber Optic Components LC Connectorized VCSEL 2.5 Gbps Notes: 1. Operating power is set by the peak operating current IPEAK=IBIAS+IMODULATION. 2. Operation at temperatures outside the specified range may result in the threshold current exceeding the maximums defined in the electro-optical characteristics table. 3. Slope efficiency is defined as Po/IF at a total power output of 0.5 mW. Slope efficiency is intentionally lowered to the values shown by optical attenuation. HFE419x-521 4. Rise and fall times are sensitive to drive electronics. 5. To safeguard the VCSEL from current spike damage, short the VCSEL anode and cathode to each other during photodiode BVR verification testing. www..com TYPICAL PERFORMANCE CURVES Emitted Power vs. Current: Power varies approximately linearly with current above threshold. Threshold Current vs. Temperature: Threshold current varies parabolically with temperature; thus it can be nearly constant for a limited temperature range. Threshold Current Emitted Power Typica l I O P , P O P I TH = I M IN [1.1x 10 -4 (T-T M IN )2 + 1] T M IN , I M IN ITH Curre nt Te m pe ra ture Emission Intensity vs. Wavelength: Typical 10 mA spectrum comprises multiple lines corresponding to multiple transverse modes. NOTICE The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESDinduced damage and/or degradation to equipment, take normal ESD precautions when handling this product. DANGER Emission Intensity FW HM of e nve lope typica lly < 0.5 nm The VCSEL is a class IIIb laser and should be treated as a potential eye hazard. Due to the size of the component, the applicable warning logotype, aperture label, and certification/ identification label cannot be placed on the component itself. These labels can be found on the individual envelope in which the VCSEL unit is packaged, or attached to the shipping package. W a ve le ngth Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com For application help: call 1-800-537-6945 www.honeywell.com/sensingVCSEL Honeywell * 3 Fiber Optic LAN Components LC Connectorized VCSEL 2.5 Gbps ORDER GUIDE Catalog Listing HFE4190-521 HFE4191-521 Description Attenuated VCSEL with Back Monitor Photodiode VCSEL Anode Common Attenuated VCSEL with Back Monitor Photodiode VCSEL Cathode Common HFE419x-521 While we provide application assistance, personally and through our literature, it is up to the customer to determine the suitability of the product in the application. Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. SALES AND SERVICE Honeywell Sensing and Control serves its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact a nearby sales office or call: TELEPHONE 1-800-367-6786 (USA) 1-800-737-3360 (Canada) +49 (0) 89 35813310 (Germany) +65-580-3312 (Singapore) +44 (0) 118 981 9511 (UK) MOUNTING DIMENSIONS (for reference only): in./(mm) www..com PINOUT HFE4190-521 Number Function 1 KLD 2 KPD, ALD 3 APD HFE4191-521 Number Function 1 ALD 2 KLD, APD 3 KPD PINOUT DEFINITIONS ALD KLD VCSEL Anode VCSEL Cathode APD KPD Monitor Photodiode Anode Monitor Photodiode Cathode FAX 1-972-470-4326 (Customer Response Center) 1-972-470-4549 (Fax on demand) +49 (0) 89 3599971 (Germany) +65 445 3033 (Singapore) +44 (0) 118 981 7513 (UK) INTERNET http://www.honeywell.com/sensing/VCSEL info.sc@honeywell.com WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Commencing with the date of shipment, Honeywell's warranty runs for 18 months. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. 7/23/01 Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 Printed with Soy Ink on 50% Recycled Paper 006694-1-EN IL50 GLO 797 Printed in USA Honeywell Inc. Optoelectronics Facility 830 East Arapaho Road Richardson, Texas 75081 Honeywell Control Systems Ltd. Zodiac House Calleva Park Aldermaston, Berkshire RG7 8HW England Helping You Control Your World Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components HFE419x-541 LC Connectorized High Speed VCSEL 2.5 Gbps FEATURES * Designed for small form factor transceivers * Prealigned connector sleeve that is compatible with the LC standard (LC is a trademark of www..com Lucent Technologies) * Designed for drive currents * Optimized for low dependence of electrical properties over temperature * High speed 1 GHz * Two different laser/ photodiode polarities * Attenuating coating * Packaged with a photodetector The HFE419x-541 is a high-performance 850 nm VCSEL (Vertical Cavity Surface-Emitting Laser) packaged for high-speed data communications. This product combines all the performance advantages of the VCSEL with a custom designed power monitor diode. The power monitor diode can be used with appropriate feedback control circuitry to set a maximum power level for each VCSEL. In addition, built-in power attenuation reduces the effective slope efficiency. These combined features simplify design for high data rate communication and eye safety. Packaged in a fiber receptacle sleeve, this high radiance VCSEL is designed to convert electrical current into optical power that can be used in fiber optic communications and other applications. As the current varies above threshold, the light intensity increases proportionally. The HFE419x-541 is designed to be used with inexpensive silicon or gallium arsenide detectors, but excellent performance can also be achieved with some indium gallium arsenide detectors. The low drive current requirement makes direct drive from PECL (Positive Emitter Coupled Logic) or EML (Emitter Coupled Logic) gates possible and eases driver design. The HFE419x-541 is a prealigned and focused fiber optic transmitter designed to interface with 50/125 and 62.5/125 m multimode fiber. LASER RADIATION AVOID EXPOSURE TO BEAM CLASS 3B LASER PRODUCT Honeywell www.honeywell.com/VCSEL Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components LC Connectorized VCSEL 2.5Gbps ABSOLUTE MAXIMUM RATINGS Parameter Storage Temperature Operating Temperature Lead Solder Temperature Continuous Optical Output Power (Any Current) Laser Diode Reverse Voltage (IR=10 A) Laser Continuous Forward Current, Heat-Sinked PIN Photodiode Forward Current www..com HFE419x-541 Rating -40 to +85C 0 to +70C 260C, 10 sec. 5 mW 5V 12 mA 10 mA NOTICE Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability. ELECTRO-OPTICAL CHARACTERISTICS (TA=25 oC unless otherwise stated) VCSEL Parameters Peak Fiber Coupled Optical Power (See threshold current and slope efficiency which control power output) Threshold Current Threshold Current Temperature Variation Slope Efficiency Slope Efficiency Temperature Variation Peak Wavelength P Temp Coefficient Spectral Bandwidth Laser Forward Voltage Laser Reverse Voltage Rise and Fall Time Relative Intensity Noise Series Resistance Series Resistance Temperature Coefficient Photodiode Parameters Monitor Current Monitor Current Temperature Variation Dark Current PD Reverse Voltage PD Capacitance Test Condition IF=7 mA av. 50/125 m fiber NA=0.20 Symbol POC Min. Typ. 500 Max. Units W Notes 1 ITH TA = 0oC to 70oC ITH TA = 0oC to 70oC IF=7 mA IF=7 mA IF=7 mA, FWHM IF=7 mA IR=10 A Bias Above Threshold (20%-80%) 1 GHz BW IF=7 mA IF=7 mA, 0oC to 70oC /T P P/T VF BVRLD tR tF RIN RS dRs/dT 1 -1.5 0.04 2 3 1.5 0.16 mA mA mW/mA PPM/ oC 2 3 -6000 830 850 0.06 0.85 1.8 -10 2.2 130 150 -122 55 860 Nm nm/ oC nm V V ps dB/Hz Ohms PPM/oC 4 22 -130 35 -3000 Test Condition POC=0.5 mW POC=0.5 mW Po=0 mW, VR=3 V Po=0 mW, IR=10 A VR=0 V, Freq=1 MHz VR=3 V, Freq=1 MHz Symbol IPD IPD/T ID BVRPD C Min. Typ. 0.35 0.2 Max. Units mA %/ oC nA V pF Notes 20 30 115 75 40 100 55 5 Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com 2 Honeywell * www.honeywell.com/VCSEL For application help: call 1-800-537-6945 Fiber Optic Components LC Connectorized VCSEL 2.5 Gbps Notes: 1. Operating power is set by the peak operating current IPEAK=IBIAS+IMODULATION. 2. Operation at temperatures outside the specified range may result in the threshold current exceeding the maximums defined in the electro-optical characteristics table. 3. Slope efficiency is defined as Po/IF at a total power output of 0.5 mW. Slope efficiency is intentionally lowered to the values shown by optical attenuation. HFE419x-541 4. Rise and fall times are sensitive to drive electronics. 5. To safeguard the VCSEL from current spike damage, short the VCSEL anode and cathode to each other during photodiode BVR verification testing. www..com TYPICAL PERFORMANCE CURVES Emitted Power vs. Current: Power varies approximately linearly with current above threshold. Threshold Current vs. Temperature: Threshold current varies parabolically with temperature; thus it can be nearly constant for a limited temperature range. Threshold Current Emitted Power Typica l I O P , P O P I TH = I M IN [1.1x 10 -4 (T-T M IN )2 + 1] T M IN , I M IN ITH Curre nt Te m pe ra ture Emission Intensity vs. Wavelength: Typical 10 mA spectrum comprises multiple lines corresponding to multiple transverse modes. NOTICE The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESDinduced damage and/or degradation to equipment, take normal ESD precautions when handling this product. DANGER Emission Intensity FW HM of e nve lope typica lly < 0.5 nm The VCSEL is a class IIIb laser and should be treated as a potential eye hazard. Due to the size of the component, the applicable warning logotype, aperture label, and certification/ identification label cannot be placed on the component itself. These labels can be found on the individual envelope in which the VCSEL unit is packaged, or attached to the shipping package. W a ve le ngth Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com For application help: call 1-800-537-6945 www.honeywell.com/VCSEL Honeywell * 3 Fiber Optic LAN Components LC Connectorized VCSEL 2.5 Gbps ORDER GUIDE Catalog Listing HFE4190-541 HFE4191-541 Description Attenuated VCSEL with Back Monitor Photodiode VCSEL Anode Common Attenuated VCSEL with Back Monitor Photodiode VCSEL Cathode Common HFE419x-541 While we provide application assistance, personally and through our literature, it is up to the customer to determine the suitability of the product in the application. Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. SALES AND SERVICE Honeywell Sensing and Control serves its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact a nearby sales office or call: TELEPHONE 1-800-367-6786 (USA) 1-800-737-3360 (Canada) +49 (0) 89 35813310 (Germany) +65-580-3312 (Singapore) +44 (0) 118 981 9511 (UK) MOUNTING DIMENSIONS (for reference only): in./(mm) www..com Current Dimension PINOUT HFE4190-541 Number Function 1 KLD 2 KPD, ALD 3 APD HFE4191-541 Number Function 1 ALD 2 KLD, APD 3 KPD PINOUT DEFINITIONS ALD KLD VCSEL Anode VCSEL Cathode APD KPD Monitor Photodiode Anode Monitor Photodiode Cathode FAX 1-972-470-4326 (Customer Response Center) 1-972-470-4549 (Fax on demand) +49 (0) 89 3599971 (Germany) +65 445 3033 (Singapore) +44 (0) 118 981 7513 (UK) INTERNET http://www.honeywell.com/VCSEL VCSEL@honeywell.com WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Commencing with the date of shipment, Honeywell's warranty runs for 18 months. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. 03/08/02 Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 Printed with Soy Ink on 50% Recycled Paper 006694-1-EN IL50 GLO 797 Printed in USA Honeywell Inc. Optoelectronics Facility 830 East Arapaho Road Richardson, Texas 75081 Honeywell Control Systems Ltd. Zodiac House Calleva Park Aldermaston, Berkshire RG7 8HW England Helping You Control Your World Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic Components LC Connectorized VCSEL 2.5 Gbps Future Dimension (available starting April 2002) HFE419x-541 www..com For application help: call 1-800-537-6945 PK XXXX X DMM Printed in USA Preliminary Honeywell * 5 Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components HFE439x-521 SC Connectorized High Speed VCSEL 2.5Gbps Preliminary FEATURES * Prealigned connector sleeve that is compatible with the SC standard * Designed for drive currents between 5 and 15 mA www..com * Optimized for low dependence of electrical properties over temperature * High speed 1 GHz * Two different laser/ photodiode polarities * Attenuating coating * Packaged with a photodetector The HFE439x-521 is a high-performance 850 nm VCSEL (Vertical Cavity Surface-Emitting Laser) packaged for high-speed data communications. This product combines all the performance advantages of the VCSEL with a custom designed power monitor diode. The power monitor diode can be used with appropriate feedback control circuitry to set a maximum power level for each VCSEL. In addition, built-in power attenuation reduces the effective slope efficiency. These combined features simplify design for high data rate communication and eye safety. Packaged in a fiber receptacle sleeve, this high radiance VCSEL is designed to convert electrical current into optical power that can be used in fiber optic communications and other applications. As the current varies above threshold, the light intensity increases proportionally. The HFE439x-521 is designed to be used with inexpensive silicon or gallium arsenide detectors, but excellent performance can also be achieved with some indium gallium arsenide detectors. The low drive current requirement makes direct drive from PECL (Positive Emitter Coupled Logic) or EML (Emitter Coupled Logic) gates possible and eases driver design. The HFE439x-521 is a prealigned and focused fiber optic transmitter designed to interface with 50/125 and 62.5/125 m multimode fiber. LASER RADIATION AVOID EXPOSURE TO BEAM CLASS 3B LASER PRODUCT Honeywell Sensing and Control www.honeywell.com/sensing/VCSEL Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components SC Connectorized VCSEL 2.5Gbps ABSOLUTE MAXIMUM RATINGS Parameter Storage Temperature Operating Temperature Lead Solder Temperature Continuous Optical Output Power (Any Current) Laser Diode Reverse Voltage (IR=10 A) Laser Continuous Forward Current, Heat-Sinked PIN Photodiode Forward Current www..com HFE439x-521 Preliminary NOTICE Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability. Rating -40 to +85C 0 to +70C 260C, 10 sec. 5 mW 5V 15 mA 10 mA ELECTRO-OPTICAL CHARACTERISTICS (TA=25 oC unless otherwise stated) VCSEL Parameters Peak Fiber Coupled Optical Power (See threshold current and slope efficiency which control power output) Threshold Current Threshold Current Temperature Variation Slope Efficiency Slope Efficiency Temperature Variation Peak Wavelength P Temp Coefficient Spectral Bandwidth Laser Forward Voltage Laser Reverse Voltage Rise and Fall Time Relative Intensity Noise Series Resistance Series Resistance Temperature Coefficient Photodiode Parameters Monitor Current Monitor Current Temperature Variation Dark Current PD Reverse Voltage PD Capacitance Test Condition IF=9 mA Peak 50/125 m fiber NA=0.20 Symbol POC Min. Typ. 350 Max. Units W Notes 1 ITH TA = 0oC to 70oC POC=0.5 mW TA = 0oC to 70oC IF=9 mA IF=9 mA IF=9 mA, FWHM IF=9 mA IR=10 A Bias Above Threshold (20%-80%) 1 GHz BW IF=9 mA IF=9 mA, 0oC to 70oC ITH /T P P/T VF BVRLD tR tF RIN RS dRs/dT 1 -1.5 0.028 3 5 1.5 0.14 mA mA mW/mA PPM/ oC 2 3 -6000 830 850 0.06 0.85 1.8 -10 2.2 130 150 -122 40 860 nm nm/ oC nm V V ps dB/Hz Ohms PPM/oC 4 18 -130 25 -3000 Test Condition POC=0.5 mW POC=0.5 mW Po=0 mW, VR=3 V Po=0 mW, IR=10 A VR=0 V, Freq=1 MHz VR=3 V, Freq=1 MHz Symbol IPD IPD/T ID BVRPD C Min. Typ. 0.42 0.2 Max. Units mA %/ oC nA V pF Notes 20 30 115 75 40 100 55 5 Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com 2 Honeywell * Sensing and Control www.honeywell.com/sensing/VCSEL For application help: call 1-800-537-6945 Fiber Optic Components SC Connectorized VCSEL 2.5Gbps Notes: 1. Operating power is set by the peak operating current IPEAK=IBIAS+IMODULATION. 2. Operation at temperatures outside the specified range may result in the threshold current exceeding the maximums defined in the electro-optical characteristics table. 3. Slope efficiency is defined as Po/IF at a total power output of 0.5 mW. Slope efficiency is intentionally lowered to the values shown by optical attenuation. HFE439x-521 Preliminary 4. Rise and fall times are sensitive to drive electronics. 5. To safeguard the VCSEL from current spike damage, short the VCSEL anode and cathode to each other during photodiode BVR verification testing. www..com TYPICAL PERFORMANCE CURVES Emitted Power vs. Current: Power varies approximately linearly with current above threshold. Threshold Current vs. Temperature: Threshold current varies parabolically with temperature; thus it can be nearly constant for a limited temperature range. Threshold Current Emitted Power Typica l I O P , P O P I TH = I M IN [1.1x 10 -4 (T-T M IN )2 + 1] T M IN , I M IN ITH Curre nt Te m pe ra ture Emission Intensity vs. Wavelength: Typical 10 mA spectrum comprises multiple lines corresponding to multiple transverse modes. NOTICE The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESDinduced damage and/or degradation to equipment, take normal ESD precautions when handling this product. DANGER Emission Intensity FW HM of e nve lope typica lly < 0.5 nm The VCSEL is a class IIIb laser and should be treated as a potential eye hazard. Due to the size of the component, the applicable warning logotype, aperture label, and certification/ identification label cannot be placed on the component itself. These labels can be found on the individual envelope in which the VCSEL unit is packaged, or attached to the shipping package. W a ve le ngth Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com For application help: call 1-800-537-6945 www.honeywell.com/sensingVCSEL Honeywell * Sensing and Control 3 Fiber Optic LAN Components SC Connectorized VCSEL 2.5Gbps ORDER GUIDE Catalog Listing HFE4390-521 HFE4391-521 Description Attenuated VCSEL with Back Monitor Photodiode VCSEL Anode Common Attenuated VCSEL with Back Monitor Photodiode VCSEL Cathode Common HFE439x-521 Preliminary While we provide application assistance, personally and through our literature, it is up to the customer to determine the suitability of the product in the application. Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. SALES AND SERVICE Honeywell Sensing and Control serves its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact a nearby sales office or call: TELEPHONE 1-800-367-6786 (USA) 1-800-737-3360 (Canada) +49 (0) 89 35813310 (Germany) +65-580-3312 (Singapore) +44 (0) 118 981 9511 (UK) MOUNTING DIMENSIONS (for reference only): in./(mm) www..com PINOUT HFE4390-521 Number Function 1 KLD 2 KPD, ALD 3 APD HFE4391-521 Number Function 1 ALD 2 KLD, APD 3 KPD PINOUT DEFINITIONS ALD KLD VCSEL Anode VCSEL Cathode APD KPD Monitor Photodiode Anode Monitor Photodiode Cathode FAX 1-972-470-4326 (Customer Response Center) 1-972-470-4549 (Fax on demand) +49 (0) 89 3599971 (Germany) +65 445 3033 (Singapore) +44 (0) 118 981 7513 (UK) INTERNET http://www.honeywell.com/sensing/VCSEL info.sc@honeywell.com WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Commencing with the date of shipment, Honeywell's warranty runs for 18 months. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. 7/23/01 Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 Printed with Soy Ink on 50% Recycled Paper 006694-1-EN IL50 GLO 797 Printed in USA Honeywell Inc. Optoelectronics Facility 830 East Arapaho Road Richardson, Texas 75081 Honeywell Control Systems Ltd. Zodiac House Calleva Park Aldermaston, Berkshire RG7 8HW England Helping You Control Your World Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components HFE439x-541 SC Connectorized High Speed VCSEL 2.5Gbps FEATURES * Prealigned connector sleeve that is compatible with the SC standard * Designed for drive currents between 3 and 12 mA www..com * Optimized for low dependence of electrical properties over temperature * High speed 1 GHz * Two different laser/ photodiode polarities * Attenuating coating * Packaged with a photodetector The HFE439x-541 is a high-performance 850 nm VCSEL (Vertical Cavity Surface-Emitting Laser) packaged for high-speed data communications. This product combines all the performance advantages of the VCSEL with a custom designed power monitor diode. The power monitor diode can be used with appropriate feedback control circuitry to set a maximum power level for each VCSEL. In addition, built-in power attenuation reduces the effective slope efficiency. These combined features simplify design for high data rate communication and eye safety. Packaged in a fiber receptacle sleeve, this high radiance VCSEL is designed to convert electrical current into optical power that can be used in fiber optic communications and other applications. As the current varies above threshold, the light intensity increases proportionally. The HFE439x-541 is designed to be used with inexpensive silicon or gallium arsenide detectors, but excellent performance can also be achieved with some indium gallium arsenide detectors. The low drive current requirement makes direct drive from PECL (Positive Emitter Coupled Logic) or EML (Emitter Coupled Logic) gates possible and eases driver design. The HFE439x-541 is a prealigned and focused fiber optic transmitter designed to interface with 50/125 and 62.5/125 m multimode fiber. LASER RADIATION AVOID EXPOSURE TO BEAM CLASS 3B LASER PRODUCT Honeywell www.honeywell.com/VCSEL Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components LC Connectorized VCSEL 2.5Gbps ABSOLUTE MAXIMUM RATINGS Parameter Storage Temperature Operating Temperature Lead Solder Temperature Continuous Optical Output Power (Any Current) Laser Diode Reverse Voltage (IR=10 A) Laser Continuous Forward Current, Heat-Sinked PIN Photodiode Forward Current www..com HFE439x-541 Rating -40 to +85C 0 to +70C 260C, 10 sec. 5 mW 5V 12 mA 10 mA NOTICE Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability. ELECTRO-OPTICAL CHARACTERISTICS (TA=25 oC unless otherwise stated) VCSEL Parameters Peak Fiber Coupled Optical Power (See threshold current and slope efficiency which control power output) Threshold Current Threshold Current Temperature Variation Slope Efficiency Slope Efficiency Temperature Variation Peak Wavelength P Temp Coefficient Spectral Bandwidth Laser Forward Voltage Laser Reverse Voltage Rise and Fall Time Relative Intensity Noise Series Resistance Series Resistance Temperature Coefficient Photodiode Parameters Monitor Current Monitor Current Temperature Variation Dark Current PD Reverse Voltage PD Capacitance Test Condition IF=7 mA av. 50/125 m fiber NA=0.20 Symbol POC Min. Typ. 500 Max. Units W Notes 1 ITH TA = 0oC to 70oC ITH TA = 0oC to 70oC IF=7 mA IF=7 mA IF=7 mA, FWHM IF=7 mA IR=10 A Bias Above Threshold (20%-80%) 1 GHz BW IF=7 mA IF=7 mA, 0oC to 70oC /T P P/T VF BVRLD tR tF RIN RS dRs/dT 1 -1.5 0.04 2 3 1.5 0.16 mA mA mW/mA PPM/ oC 2 3 -6000 830 850 0.06 0.85 1.8 -10 2.2 130 150 -122 55 860 Nm nm/ oC nm V V ps dB/Hz Ohms PPM/oC 4 22 -130 35 -3000 Test Condition POC=0.5 mW POC=0.5 mW Po=0 mW, VR=3 V Po=0 mW, IR=10 A VR=0 V, Freq=1 MHz VR=3 V, Freq=1 MHz Symbol IPD IPD/T ID BVRPD C Min. Typ. 0.35 0.2 Max. Units mA %/ oC nA V pF Notes 20 30 115 75 40 100 55 5 Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com 2 Honeywell * www.honeywell.com/VCSEL For application help: call 1-800-537-6945 Fiber Optic Components SC Connectorized VCSEL 2.5Gbps Notes: 1. Operating power is set by the peak operating current IPEAK=IBIAS+IMODULATION. 2. Operation at temperatures outside the specified range may result in the threshold current exceeding the maximums defined in the electro-optical characteristics table. 3. Slope efficiency is defined as Po/IF at a total power output of 0.5 mW. Slope efficiency is intentionally lowered to the values shown by optical attenuation. HFE439x-541 4. Rise and fall times are sensitive to drive electronics. 5. To safeguard the VCSEL from current spike damage, short the VCSEL anode and cathode to each other during photodiode BVR verification testing. www..com TYPICAL PERFORMANCE CURVES Emitted Power vs. Current: Power varies approximately linearly with current above threshold. Threshold Current vs. Temperature: Threshold current varies parabolically with temperature; thus it can be nearly constant for a limited temperature range. Threshold Current Emitted Power Typica l I O P , P O P I TH = I M IN [1.1x 10 -4 (T-T M IN )2 + 1] T M IN , I M IN ITH Curre nt Te m pe ra ture Emission Intensity vs. Wavelength: Typical 10 mA spectrum comprises multiple lines corresponding to multiple transverse modes. NOTICE The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESDinduced damage and/or degradation to equipment, take normal ESD precautions when handling this product. DANGER Emission Intensity FW HM of e nve lope typica lly < 0.5 nm The VCSEL is a class IIIb laser and should be treated as a potential eye hazard. Due to the size of the component, the applicable warning logotype, aperture label, and certification/ identification label cannot be placed on the component itself. These labels can be found on the individual envelope in which the VCSEL unit is packaged, or attached to the shipping package. W a ve le ngth Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com For application help: call 1-800-537-6945 www.honeywell.com/VCSEL Honeywell * 3 Fiber Optic LAN Components SC Connectorized VCSEL 2.5Gbps ORDER GUIDE Catalog Listing HFE4390-541 HFE4391-541 Description Attenuated VCSEL with Back Monitor Photodiode VCSEL Anode Common Attenuated VCSEL with Back Monitor Photodiode VCSEL Cathode Common HFE439x-541 While we provide application assistance, personally and through our literature, it is up to the customer to determine the suitability of the product in the application. Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. SALES AND SERVICE Honeywell Sensing and Control serves its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact a nearby sales office or call: TELEPHONE 1-800-367-6786 (USA) 1-800-737-3360 (Canada) +49 (0) 89 35813310 (Germany) +65-580-3312 (Singapore) +44 (0) 118 981 9511 (UK) MOUNTING DIMENSIONS (for reference only): in./(mm) www..com PINOUT HFE4390-541 Number Function 1 KLD 2 KPD, ALD 3 APD HFE4391-541 Number Function 1 ALD 2 KLD, APD 3 KPD PINOUT DEFINITIONS ALD KLD VCSEL Anode VCSEL Cathode APD KPD Monitor Photodiode Anode Monitor Photodiode Cathode FAX 1-972-470-4326 (Customer Response Center) 1-972-470-4549 (Fax on demand) +49 (0) 89 3599971 (Germany) +65 445 3033 (Singapore) +44 (0) 118 981 7513 (UK) INTERNET http://www.honeywell.com/VCSEL VCSEL@honeywell.com WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Commencing with the date of shipment, Honeywell's warranty runs for 18 months. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. 01/29/02 Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 Printed with Soy Ink on 50% Recycled Paper 006694-1-EN IL50 GLO 797 Printed in USA Honeywell Inc. Optoelectronics Facility 830 East Arapaho Road Richardson, Texas 75081 Honeywell Control Systems Ltd. Zodiac House Calleva Park Aldermaston, Berkshire RG7 8HW England Helping You Control Your World Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components LC SFF Duplex OFE 2.5 Gbps FEATURES * Prealigned Fixed LC Duplex Optical Front End (OFE) * VCSEL packaged with a back monitor photodiode * Common anode and common cathode polarities available * TO-46 hermetic package for www..comVCSEL and Pin + Preamp * 3.3 V operation * GaAs PIN detector and BiCMOS preamplifier * Differential output for low noise * High Speed >1GHz * Laser signal is attenuated * Unattenuated versions available as well (HFT2193-522 and HFT2194-522) HFT219x-521 The HFT219x-52x is a single package transmitter and receiver designed to interface with the LC style optical connectors. The transmitter is a high performance 850nm VCSEL (Vertical Cavity Surface Emitting Laser) packaged for high speed data communications. This product combines all the performance advantages of VCSEL with a custom designed power monitor diode. The power monitor diode can be used with an appropriate feedback control circuitry to set a maximum power level for each VCSEL. Attenuating coatings are available on the Laser transmitter to simplify design and assist in meeting eye safety requirements. The PIN + preamp converts optical power into a differential output electrical signal. As the light increases, the differential output voltage increases, limiting at input powers above -10dBm. The differential output is designed to be AC coupled into a data amplifier. The Honeywell HFT219x-521 is designed to interface with 50/125 and 62.5/125m multimode fiber within an LC style interface. LASER RADIATION AVOID EXPOSURE TO BEAM CLASS 3B LASER PRODUCT Honeywell www.honeywell.com/sensing/VCSEL Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components LC SFF Duplex OFE 2.5 Gbps VCSEL PARAMETERS HFT219x-521 ELECTRO-OPTICAL CHARACTERISTICS (TA=25 oC unless otherwise stated) VCSEL Parameters Peak Fiber Coupled Optical Power (See threshold current and slope efficiency which control power output) Threshold Current www..com Threshold Current Temperature Variation Slope Efficiency Slope Efficiency Temperature Variation Peak Wavelength P Temp Coefficient Spectral Bandwidth Laser Forward Voltage Laser Reverse Voltage Rise and Fall Time Relative Intensity Noise Series Resistance Series Resistance Temperature Coefficient Photodiode Parameters Monitor Current Monitor Current Temperature Variation Dark Current PD Reverse Voltage PD Capacitance Test Condition IF=9 mA Peak 50/125 m fiber NA=0.20 Symbol POC Min. Typ. 350 Max. Units W Notes 1 ITH TA = 0oC to 70oC POC=0.5 mW TA = 0 C to 70 C IF=9 mA IF=9 mA IF=9 mA, FWHM IF=9 mA IR=10 A Bias Above Threshold (20%-80%) 1 GHz BW IF=9 mA IF=9 mA, 0oC to 70oC o o ITH /T P P/T VF BVRLD tR tF RIN RS dRs/dT 1 -1.5 0.028 3 5 1.5 0.14 mA mA mW/mA PPM/ C o 2 3 -6000 830 850 0.06 0.85 1.8 -10 2.2 130 150 -122 40 860 nm nm/ oC nm V V ps dB/Hz Ohms PPM/oC 4 18 -130 25 -3000 Test Condition POC=0.5 mW POC=0.5 mW Po=0 mW, VR=3 V Po=0 mW, IR=10 A VR=0 V, Freq=1 MHz VR=3 V, Freq=1 MHz Symbol IPD IPD/T ID BVRPD C Min. Typ. 0.42 0.2 Max. Units mA %/ oC nA V pF Notes 20 30 115 75 40 100 55 5 Notes: 1. 2. 3. 4. 5. Operating power is set by the peak operating current IPEAK=IBIAS+IMODULATION. Operation at temperatures outside the specified range may result in the threshold current exceeding the maximums defined in the electro-optical characteristics table. Slope efficiency is defined as Po/IF at a total power output of 0.5 mW. Slope efficiency is intentionally lowered to the values shown by optical attenuation. Rise and fall times are sensitive to drive electronics. To safeguard the VCSEL from current spike damage, short the VCSEL anode and cathode to each other during photodiode BVR verification testing. Additionally to safeguard the PIN photodiode, limit the photodiode reverse voltage in accordance with the absolute maximum rating 2 Honeywell www.honeywell.com/sensing/VCSEL For Application Help: Call 1-800-537-6945 Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components LC SFF Duplex OFE 2.5 Gbps RECEIVER PARAMETERS HFT219x-521 Typ. 3.3 26 200 1600 2400 500 -24 30 40 250 860 2800 Max. 3.8 50 500 Units Volts mA mV V/W MHz nW dBm dB ps ps nm Notes 1 1 1 2,3 4 5 ELECTRO-OPTICAL CHARACTERISTICS (Vcc=3.3V, AC coupled to 50, 0C www..com Upper 3dB Bandwidth Symbol Min. Electrical Characteristics Vcc 3.0 Pin = 0W, Rload=50 Icc Pin = 0W, Rload=50 Vout Pin = 100W, Rload=50 Opto-Electronic Characteristics R Pin = 20W peak, Rload=50 BWupper 2000 Pin=0W, Rload=50 1875 MHz BT Filter BER=10-12, SNR=7 S -20 PSRR 10 Pin=0W, Rload=50 Pin=20W peak, Rload=50 Pin=20W peak, Rload=50 Pin=20W peak, Rload=50 PWD TR/TF Test Condition RMS Output Referred Noise Sensitivity Power Supply Rejection Ratio Pulse Width Distortion Rise/Fall Time Wavelength Responsivity 6 7 8 760 850 Notes: 1. 2. 3. Pin refers to the total optical power at the face of the fiber optic cable input. Responsivity measured with source wavelength of 850nm, 125MHz square wave, Pin=20W peak, Rload=50. The output voltage increases as received light power increases, up to approximately -15dBm. The preamplifier is designed to limit the electrical output signal above this optical input level, and does not introduce signal distortion until the average input power exceeds 0dBm. Bandwidth is measured with a small signal sinusoidal light source with 50 W average power, Rload=50. RMS input referred optical noise is obtained by measuring the RMS output referred noise, then dividing by the responsivity. PSRR is measured from 300KHz to 1GHz by injecting a -20dB electrical signal on the Vcc pin. The nominal value at 100MHz is recorded. No external bypass components are assumed. An external Vcc filter network will greatly increase the PSRR. Measured at the 50% level of output pulses using 0.5 GHz square wave with <200 ps rise time. Rise and fall times are measured with source wavelength of 850nm, 125MHz square wave, with optical rise and fall times < 200ps, Pin=20W peak, Rload=50. 4. 5. 6. 7. 8. 3 Honeywell www.honeywell.com/sensing/VCSEL For Application Help: Call 1-800-537-6945 Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components LC SFF Duplex OFE 2.5 Gbps Absolute Maximum Ratings Parameter Storage Temperature Operating Temperature Lead Solder Temperature Continuous Optical Output Power (Any Current) Laser Diode Reverse Voltage (IR=10 A) www..com Laser Continuous Forward Current, Heat-Sinked HFT219x-521 Rating -40 to +85C 0 to +70C 260C, 10 sec. 5 mW 5V 15 mA 10 mA 3.8 V 0 dBm average, +4 dBm peak PIN Photodiode Forward Current Power Supply Voltage (PIN + Preamp) Incident Optical Power NOTICE Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability. NOTICE The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESD-induced damage and/or degradation to equipment, take normal ESD precautions when handling this product ORDER GUIDE Catalog Listing HFT2190-521 HFT2191-521 Description Attenuated, Common Anode Attenuated, Common Cathode Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com 4 Honeywell www.honeywell.com/sensing/VCSEL For application help: call 1-800-537-6945 Fiber Optic LAN Components LC SFF Duplex OFE 2.5 Gbps TYPICAL PERFORMANCE CURVES Emitted Power vs. Current: Power varies approximately linearly with current above threshold. HFT219x-521 Threshold Current vs. Temperature: Threshold current varies parabolically with temperature; thus it can be nearly constant for a limited temperature range. Emitted Power Threshold Current Typica l I O P , P O P I TH = I MIN [1.1x10-4 (T-T M IN )2 +1] www..com T M IN , I M IN ITH Current Temperature Emission Intensity vs. Wavelength: Typical 10 mA spectrum comprises multiple lines corresponding to multiple transverse modes. NOTICE The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESDinduced damage and/or degradation to equipment, take normal ESD precautions when handling this product. DANGER Emission Intensity FW HM of e nve lope typica lly <0.5 nm The VCSEL is a class IIIb laser and should be treated as a potential eye hazard. Due to the size of the component, the applicable warning logotype, aperture label, and certification/ identification label cannot be placed on the component itself. These labels can be found on the individual envelope in which the VCSEL unit is packaged, or attached to the shipping package. W a ve le ngth 5 Honeywell www.honeywell.com/sensing/VCSEL For application help: call 1-800-537-6945 Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components LC SFF Duplex OFE 2.5 Gbps FIGURE 1: INTERNAL SCHEMATIC DIAGRAM OF THE HFD3180-102 Vcc HFT219x-521 Inverted Output www..com Non-Inverted Preamplifier PIN Internal Limiting Amplifier Ground FIGURE 2: RECOMMENDED INTERFACE CIRCUIT FOR THE HFD3180-102 HFD3180 R Vcc C1 Ground Inverted Output 50 ohm transmission line Non-Inverted Output 50 ohm transmission line C2 C2 Limiting Amplifier or Test Equipment Input Input R=10= C1 = 10 nF C2 = DATA RATE DEPENDANT (22NF FOR RATES > 1GB 6 Honeywell www.honeywell.com/sensing/VCSEL For application help: call 1-800-537-6945 Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components LC SFF Duplex OFE 2.5 Gbps HFT219x-521 www..com 7 Honeywell www.honeywell.com/sensing/VCSEL For application help: call 1-800-537-6945 Fiber Optic LAN Components LC SFF Duplex OFE 2.5 Gbps WARRANTY/REMEDY HFT219x-521 Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Commencing with the date of shipment, Honeywell's warranty runs for 18 months. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. While we provide application assistance, personally and through our literature, it is up to the customer to determine the suitability of the product in the application. www..com Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. SALES AND SERVICE Honeywell Sensing and Control serves its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact a nearby sales office or call: TELEPHONE 1-800-367-6786 (USA) 1-800-737-3360 (Canada) +49 (0) 89 35813310 (Germany) +65-580-3312 (Singapore) +44 (0) 118 981 9511 (UK) FAX 1-972-470-4326 (Customer Response Center) 1-972-470-4549 (Fax on demand) +49 (0) 89 3599971 (Germany) +65 445 3033 (Singapore) +44 (0) 118 981 7513 (UK) INTERNET http://www.honeywell.com/sensing/VCSEL info.sc@honeywell.com 7/23/01 Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 Printed with Soy Ink on 50% Recycled Paper PK XXXX X DMM Printed in USA Honeywell Inc. Optoelectronics Facility 830 East Arapaho Road Richardson, Texas 75081 Honeywell Control Systems Ltd. Zodiac House Calleva Park Aldermaston, Berkshire RG7 8HW England Helping You Control Your World Fiber Optic LAN Components LC SFF Duplex OFE 2.5 Gbps FEATURES * Prealigned Fixed LC Duplex Optical Front End (OFE) * VCSEL packaged with a back monitor photodiode * Common anode and common cathode polarities available * TO-46 hermetic package for www..comVCSEL and Pin + Preamp * 3.3 V operation * GaAs PIN detector and BiCMOS preamplifier * Differential output for low noise * High Speed >1GHz * Laser signal is attenuated HFT219x-541 The HFT219x-541 is a single package transmitter and receiver designed to interface with the LC style optical connectors. The transmitter is a high performance 850nm VCSEL (Vertical Cavity Surface Emitting Laser) packaged for high speed data communications. This product combines all the performance advantages of VCSEL with a custom designed power monitor diode. The power monitor diode can be used with an appropriate feedback control circuitry to set a maximum power level for each VCSEL. Attenuating coatings are available on the Laser transmitter to simplify design and assist in meeting eye safety requirements. The PIN + preamp converts optical power into a differential output electrical signal. As the light increases, the differential output voltage increases, limiting at input powers above -10dBm. The differential output is designed to be AC coupled into a data amplifier. The Honeywell HFT219x-541 is designed to interface with 50/125 and 62.5/125m multimode fiber within an LC style interface. LASER RADIATION AVOID EXPOSURE TO BEAM CLASS 3B LASER PRODUCT Honeywell www.honeywell.com/VCSEL Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components LC SFF Duplex OFE 2.5 Gbps VCSEL PARAMETERS VCSEL Parameters Peak Fiber Coupled Optical Power (See threshold current and slope efficiency which control power output) Threshold Current Threshold Current Temperature www..com Variation Slope Efficiency Slope Efficiency Temperature Variation Peak Wavelength P Temp Coefficient Spectral Bandwidth Laser Forward Voltage Laser Reverse Voltage Rise and Fall Time Relative Intensity Noise Series Resistance Series Resistance Temperature Coefficient Photodiode Parameters Monitor Current Monitor Current Temperature Variation Dark Current PD Reverse Voltage PD Capacitance Test Condition IF=7 mA av. 50/125 m fiber NA=0.20 Symbol POC Min. HFT219x-541 Typ. 500 Max. Units W Notes 1 ITH TA = 0oC to 70oC ITH TA = 0oC to 70oC IF=7 mA IF=7 mA IF=7 mA, FWHM IF=7 mA IR=10 A Bias Above Threshold (20%-80%) 1 GHz BW IF=7 mA IF=7 mA, 0oC to 70oC /T P P/T VF BVRLD tR tF RIN RS dRs/dT 1 -1.5 0.04 2 3 1.5 0.16 mA mA mW/mA PPM/ oC 2 3 -6000 830 850 0.06 0.85 1.8 -10 2.2 130 150 -122 55 860 Nm nm/ oC nm V V ps dB/Hz Ohms PPM/oC 4 22 -130 35 -3000 Test Condition POC=0.5 mW POC=0.5 mW Po=0 mW, VR=3 V Po=0 mW, IR=10 A VR=0 V, Freq=1 MHz VR=3 V, Freq=1 MHz Symbol IPD IPD/T ID BVRPD C Min. Typ. 0.35 0.2 Max. Units mA %/ oC nA V pF Notes 20 30 115 75 40 100 55 5 Notes: 1. Operating power is set by the peak operating current IPEAK=IBIAS+IMODULATION. 2. Operation at temperatures outside the specified range may result in the threshold current exceeding the maximums defined in the electro-optical characteristics table. 3. Slope efficiency is defined as Po/IF at a total power output of 0.5 mW. Slope efficiency is intentionally lowered to the values shown by optical attenuation. 4. Rise and fall times are sensitive to drive electronics. 5. To safeguard the VCSEL from current spike damage, short the VCSEL anode and cathode to each other during photodiode BVR verification testing. 2 Honeywell www.honeywell.com/VCSEL For Application Help: Call 1-800-537-6945 Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components LC SFF Duplex OFE 2.5 Gbps RECEIVER PARAMETERS HFT219x-541 Typ. 3.3 26 50 1400 160 1900 1.5 -20 30 40 250 860 Max. 3.6 40 100 62 Units Volts mA mV V/W mV MHz mV dBm dB ps ps nm W 2,3,10 1 4 5 Notes 1 1 9,10 ELECTRO-OPTICAL CHARACTERISTICS (Vcc=3.3V, AC coupled to 50, 0C www..com 400 2500 2.25 6 7 8 9,10 760 850 60 Notes: Pin refers to the peak optical power at the face of the fiber optic cable input to the HFD3180-102. Responsivity measured with source wavelength of 850nm, freq = 0Hz, Pin< AGCth, Rload=50, sample tested at 2.5Gbps The output voltage increases as received light power increases, up to approximately -15dBm depending upon the AGCth. The preamplifier is designed to limit the electrical output signal above this optical input level, and does not introduce signal distortion until the average input power exceeds 0dBm. 4. Bandwidth is measured with a small signal sinusoidal light source with 50 W average power, Rload=50. 5. RMS input referred optical noise is sample tested by measuring the RMS output referred noise, then dividing by the responsivity. 6. PSRR is sample tested from 300KHz to 1GHz by injecting a -20dB electrical signal on the Vcc pin. The nominal value at 100MHz is recorded. No external bypass components are assumed. An external Vcc filter network will greatly increase the PSRR. 7. Sample tested at the 50% level of output pulses. 8. Rise and fall times are sample tested with source wavelength of 850nm, 125MHz square wave, with optical rise and fall times < 200ps, Pin< AGCth, Rload=50. Measured at 20% - 80% signal levels 9. Output offset voltage is defined as Vout - VoutQ with no light 10. The AGCth power depends on the offset voltage. Refer to fig 3. 1. 2. 3. 3 Honeywell www.honeywell.com/VCSEL For Application Help: Call 1-800-537-6945 Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components LC SFF Duplex OFE 2.5 Gbps Absolute Maximum Ratings Parameter Storage Temperature Operating Temperature Lead Solder Temperature Continuous Optical Output Power (Any Current) Laser Diode Reverse Voltage (IR=10 A) www..com Laser Continuous Forward Current, Heat-Sinked HFT219x-541 Rating -40 to +85C 0 to +70C 260C, 10 sec. 5 mW 5V 12 mA 10 mA 3.8 V 0 dBm average, +4 dBm peak PIN Photodiode Forward Current Power Supply Voltage (PIN + Preamp) Incident Optical Power NOTICE Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability. NOTICE The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESD-induced damage and/or degradation to equipment, take normal ESD precautions when handling this product ORDER GUIDE Catalog Listing HFT2190-541 HFT2191-541 Description Attenuated, Common Anode Attenuated, Common Cathode Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com 4 Honeywell www.honeywell.com/VCSEL For application help: call 1-800-537-6945 Fiber Optic LAN Components LC SFF Duplex OFE 2.5 Gbps TYPICAL PERFORMANCE CURVES Emitted Power vs. Current: Power varies approximately linearly with current above threshold. HFT219x-541 Threshold Current vs. Temperature: Threshold current varies parabolically with temperature; thus it can be nearly constant for a limited temperature range. Emitted Power Threshold Current Typica l I O P , P O P I TH = I MIN [1.1x10-4 (T-T M IN )2 +1] www..com T M IN , I M IN ITH Current Temperature Emission Intensity vs. Wavelength: Typical 10 mA spectrum comprises multiple lines corresponding to multiple transverse modes. NOTICE The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESDinduced damage and/or degradation to equipment, take normal ESD precautions when handling this product. DANGER Emission Intensity FW HM of e nve lope typica lly <0.5 nm The VCSEL is a class IIIb laser and should be treated as a potential eye hazard. Due to the size of the component, the applicable warning logotype, aperture label, and certification/ identification label cannot be placed on the component itself. These labels can be found on the individual envelope in which the VCSEL unit is packaged, or attached to the shipping package. W a ve le ngth 5 Honeywell www.honeywell.com/VCSEL For application help: call 1-800-537-6945 Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components LC SFF Duplex OFE 2.5 Gbps FIGURE 1: INTERNAL SCHEMATIC DIAGRAM OF THE HFD3180-102 Vcc HFT219x-541 Inverted Output Non-Inverted Output PIN Preamplifier Internal Limiting Amplifier Ground www..com FIGURE 2: RECOMMENDED INTERFACE CIRCUIT FOR THE HFD3180-102 R=10= C1 = 10 nF C2 = Data rate dependant (22nF for rates > 1Gbps HFD3180 R Vcc C1 Ground Inverted Output Non-Inverted Output C2 50 ohm transmission line C2 50 ohm transmission Limiting Amplifier or Test Equipment Input Input FIGURE 3: AGC THRESHOLD POWER VS. OUTPUT OFFSET VOLTAGE HFD3180-102 AGC THRESHOLD POWER VS. OUTPUT OFFSET VOLTAGE 120 110 100 100C, 3.0V 50C, 3.3V 0C, 3.6V AGC Threshold Power W 90 80 70 60 50 40 30 20 10 0 -100 -80 -60 -40 -20 0 20 40 60 80 100 OUTPUT OFFSET VOLTAGE (mV) Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com 6 Honeywell www.honeywell.com/VCSEL For application help: call 1-800-537-6945 Fiber Optic LAN Components LC SFF Duplex OFE 2.5 Gbps HFT219x-541 www..com 7 Honeywell www.honeywell.com/VCSEL For application help: call 1-800-537-6945 Fiber Optic LAN Components LC SFF Duplex OFE 2.5 Gbps WARRANTY/REMEDY HFT219x-541 Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Commencing with the date of shipment, Honeywell's warranty runs for 18 months. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. While we provide application assistance, personally and through our literature, it is up to the customer to determine the suitability of the product in the application. www..com Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. SALES AND SERVICE Honeywell Sensing and Control serves its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact a nearby sales office or call: TELEPHONE 1-800-367-6786 (USA) 1-800-737-3360 (Canada) +49 (0) 89 35813310 (Germany) +65-580-3312 (Singapore) +44 (0) 118 981 9511 (UK) FAX 1-972-470-4326 (Customer Response Center) 1-972-470-4549 (Fax on demand) +49 (0) 89 3599971 (Germany) +65 445 3033 (Singapore) +44 (0) 118 981 7513 (UK) INTERNET http://www.honeywell.com/VCSEL VCSEL@honeywell.com 01/29/02 Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 Printed with Soy Ink on 50% Recycled Paper PK XXXX X DMM Printed in USA Honeywell Inc. Optoelectronics Facility 830 East Arapaho Road Richardson, Texas 75081 Honeywell Control Systems Ltd. Zodiac House Calleva Park Aldermaston, Berkshire RG7 8HW England Helping You Control Your World Fiber Optic LAN Components LC SFF Duplex OFE 2.5 Gbps FEATURES * Prealigned Pluggable LC Duplex Optical Front End (OFE) in compliance with the SFF Pluggable Transceiver MultiSource Agreement. * VCSEL packaged with a back monitor photodiode www..comCommon anode and common * cathode polarities available * TO-46 hermetic package for VCSEL and Pin + Preamp * 3.3 V operation * GaAs PIN detector and BiCMOS preamplifier * Differential output for low noise * High Speed >1GHz * Laser signal is attenuated HFT229x-541 The HFT229x-541 is a single package transmitter and receiver designed to interface with the LC style optical connectors. The transmitter is a high performance 850nm VCSEL (Vertical Cavity Surface Emitting Laser) packaged for high speed data communications. This product combines all the performance advantages of VCSEL with a custom designed power monitor diode. The power monitor diode can be used with an appropriate feedback control circuitry to set a maximum power level for each VCSEL. Attenuating coatings are available on the Laser transmitter to simplify design and assist in meeting eye safety requirements. The PIN + preamp converts optical power into a differential output electrical signal. As the light increases, the differential output voltage increases, limiting at input powers above -10dBm. The differential output is designed to be AC coupled into a data amplifier. The Honeywell HFT229x-541 is designed to interface with 50/125 and 62.5/125m multimode fiber within an LC style interface. LASER RADIATION AVOID EXPOSURE TO BEAM CLASS 3B LASER PRODUCT Honeywell www.honeywell.com/VCSEL Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components LC SFF Duplex OFE 2.5 Gbps VCSEL PARAMETERS VCSEL Parameters Peak Fiber Coupled Optical Power (See threshold current and slope efficiency which control power output) Threshold Current www..com Threshold Current Temperature Variation Slope Efficiency Slope Efficiency Temperature Variation Peak Wavelength P Temp Coefficient Spectral Bandwidth Laser Forward Voltage Laser Reverse Voltage Rise and Fall Time Relative Intensity Noise Series Resistance Series Resistance Temperature Coefficient Photodiode Parameters Monitor Current Monitor Current Temperature Variation Dark Current PD Reverse Voltage PD Capacitance Test Condition IF=7 mA av. 50/125 m fiber NA=0.20 Symbol POC Min. HFT229x-541 Typ. 500 Max. Units W Notes 1 ITH TA = 0oC to 70oC ITH TA = 0oC to 70oC IF=7 mA IF=7 mA IF=7 mA, FWHM IF=7 mA IR=10 A Bias Above Threshold (20%-80%) 1 GHz BW IF=7 mA IF=7 mA, 0oC to 70oC /T P P/T VF BVRLD tR tF RIN RS dRs/dT 1 -1.5 0.04 2 3 1.5 0.16 mA mA mW/mA PPM/ oC 2 3 -6000 830 850 0.06 0.85 1.8 -10 2.2 130 150 -122 55 860 Nm nm/ oC nm V V ps dB/Hz Ohms PPM/oC 4 22 -130 35 -3000 Test Condition POC=0.5 mW POC=0.5 mW Po=0 mW, VR=3 V Po=0 mW, IR=10 A VR=0 V, Freq=1 MHz VR=3 V, Freq=1 MHz Symbol IPD IPD/T ID BVRPD C Min. Typ. 0.35 0.2 Max. Units mA %/ oC nA V pF Notes 20 30 115 75 40 100 55 5 Notes: 1. Operating power is set by the peak operating current IPEAK=IBIAS+IMODULATION. 2. Operation at temperatures outside the specified range may result in the threshold current exceeding the maximums defined in the electro-optical characteristics table. 3. Slope efficiency is defined as Po/IF at a total power output of 0.5 mW. Slope efficiency is intentionally lowered to the values shown by optical attenuation. 4. Rise and fall times are sensitive to drive electronics. 5. To safeguard the VCSEL from current spike damage, short the VCSEL anode and cathode to each other during photodiode BVR verification testing. 2 Honeywell www.honeywell.com/VCSEL For Application Help: Call 1-800-537-6945 Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components LC SFF Duplex OFE 2.5 Gbps RECEIVER PARAMETERS HFT229x-541 Typ. 3.3 26 50 1400 160 1900 1.5 -20 30 40 250 860 Max. 3.6 40 100 62 Units Volts mA mV V/W mV MHz mV dBm dB ps ps nm W 2,3,10 1 4 5 Notes 1 1 9,10 ELECTRO-OPTICAL CHARACTERISTICS (Vcc=3.3V, AC coupled to 50, 0C www..com 400 2500 2.25 6 7 8 9,10 760 850 60 Notes: Pin refers to the peak optical power at the face of the fiber optic cable input to the HFD3180-102. Responsivity measured with source wavelength of 850nm, freq = 0Hz, Pin< AGCth, Rload=50, sample tested at 2.5Gbps The output voltage increases as received light power increases, up to approximately -15dBm depending upon the AGCth. The preamplifier is designed to limit the electrical output signal above this optical input level, and does not introduce signal distortion until the average input power exceeds 0dBm. 4. Bandwidth is measured with a small signal sinusoidal light source with 50 W average power, Rload=50. 5. RMS input referred optical noise is sample tested by measuring the RMS output referred noise, then dividing by the responsivity. 6. PSRR is sample tested from 300KHz to 1GHz by injecting a -20dB electrical signal on the Vcc pin. The nominal value at 100MHz is recorded. No external bypass components are assumed. An external Vcc filter network will greatly increase the PSRR. 7. Sample tested at the 50% level of output pulses. 8. Rise and fall times are sample tested with source wavelength of 850nm, 125MHz square wave, with optical rise and fall times < 200ps, Pin< AGCth, Rload=50. Measured at 20% - 80% signal levels 9. Output offset voltage is defined as Vout - VoutQ with no light 10. The AGCth power depends on the offset voltage. Refer to fig 3. 1. 2. 3. 3 Honeywell www.honeywell.com/VCSEL For Application Help: Call 1-800-537-6945 Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components LC SFF Duplex OFE 2.5 Gbps Absolute Maximum Ratings Parameter Storage Temperature Operating Temperature Lead Solder Temperature Continuous Optical Output Power (Any Current) Laser Diode Reverse Voltage (IR=10 A) www..com Laser Continuous Forward Current, Heat-Sinked HFT229x-541 Rating -40 to +85C 0 to +70C 260C, 10 sec. 5 mW 5V 15 mA 10 mA 3.8 V 0 dBm average, +4 dBm peak PIN Photodiode Forward Current Power Supply Voltage (PIN + Preamp) Incident Optical Power NOTICE Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability. NOTICE The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESD-induced damage and/or degradation to equipment, take normal ESD precautions when handling this product ORDER GUIDE Catalog Listing HFT2290-541 HFT2291-541 Description Attenuated, Common Anode Attenuated, Common Cathode Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com 4 Honeywell www.honeywell.com/VCSEL For application help: call 1-800-537-6945 Fiber Optic LAN Components LC SFF Duplex OFE 2.5 Gbps TYPICAL PERFORMANCE CURVES Emitted Power vs. Current: Power varies approximately linearly with current above threshold. HFT229x-541 Threshold Current vs. Temperature: Threshold current varies parabolically with temperature; thus it can be nearly constant for a limited temperature range. Emitted Power Threshold Current Typica l I O P , P O P I TH = I MIN [1.1x10-4 (T-T M IN )2 +1] www..com T M IN , I M IN ITH Current Temperature Emission Intensity vs. Wavelength: Typical 10 mA spectrum comprises multiple lines corresponding to multiple transverse modes. NOTICE The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESDinduced damage and/or degradation to equipment, take normal ESD precautions when handling this product. DANGER Emission Intensity FW HM of e nve lope typica lly <0.5 nm The VCSEL is a class IIIb laser and should be treated as a potential eye hazard. Due to the size of the component, the applicable warning logotype, aperture label, and certification/ identification label cannot be placed on the component itself. These labels can be found on the individual envelope in which the VCSEL unit is packaged, or attached to the shipping package. W a ve le ngth 5 Honeywell www.honeywell.com/VCSEL For application help: call 1-800-537-6945 Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components LC SFF Duplex OFE 2.5 Gbps FIGURE 1: INTERNAL SCHEMATIC DIAGRAM OF THE HFD3180-102 VCC HFT229x-541 INVERTED PREAMPLIINTERNAL LIMITING Amplifier GROU www..com NON-INVERTED OUTPUT PIN FIGURE 2: RECOMMENDED INTERFACE CIRCUIT FOR THE HFD3180-102 R=10= C1 = 10 nF C2 = Data rate dependant (22nF for rates > 1Gbps HFD3180 R VC C1 GROUND INVERTED OUTPUT NON-INVERTED C2 50 OHM TRANSMISSION C2 50 OHM LIMITING AMPLIFIER OR INPUT INPUT FIGURE 3: AGC THRESHOLD POWER VS. OUTPUT OFFSET VOLTAGE HFD3180-102 AGC THRESHOLD POWER VS. OUTPUT OFFSET VOLTAGE 120 110 100 100C, 3.0V 50C, 3.3V 0C, 3.6V AGC Threshold Power W 90 80 70 60 50 40 30 20 10 0 -100 -80 -60 -40 -20 0 20 40 60 80 100 OUTPUT OFFSET VOLTAGE (mV) 6 Honeywell www.honeywell.com/VCSEL For application help: call 1-800-537-6945 Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components LC SFF Duplex OFE 2.5 Gbps HFT229x-541 www..com 7 Honeywell www.honeywell.com/VCSEL For application help: call 1-800-537-6945 Fiber Optic LAN Components LC SFF Duplex OFE 2.5 Gbps WARRANTY/REMEDY HFT229x-541 Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Commencing with the date of shipment, Honeywell's warranty runs for 18 months. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. While we provide application assistance, personally and through our literature, it is up to the customer to determine the suitability of the product in the application. www..com Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. SALES AND SERVICE Honeywell Sensing and Control serves its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact a nearby sales office or call: TELEPHONE 1-800-367-6786 (USA) 1-800-737-3360 (Canada) +49 (0) 89 35813310 (Germany) +65-580-3312 (Singapore) +44 (0) 118 981 9511 (UK) FAX 1-972-470-4326 (Customer Response Center) 1-972-470-4549 (Fax on demand) +49 (0) 89 3599971 (Germany) +65 445 3033 (Singapore) +44 (0) 118 981 7513 (UK) INTERNET http://www.honeywell.com/VCSEL VCSEL@honeywell.com 01/29/02 Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 Printed with Soy Ink on 50% Recycled Paper PK XXXX X DMM Printed in USA Honeywell Inc. Optoelectronics Facility 830 East Arapaho Road Richardson, Texas 75081 Honeywell Control Systems Ltd. Zodiac House Calleva Park Aldermaston, Berkshire RG7 8HW England Helping You Control Your World Fiber Optic LAN Components HFE418x-521 LC Connectorized High Speed VCSEL 1.25Gbps FEATURES * Designed for small form factor transceivers * Prealigned connector sleeve that is compatible with the LC standard (LC is a trademark of www..com Lucent Technologies) * Designed for drive currents between 5 and 15 mA * Optimized for low dependence of electrical properties over temperature * High speed 1 GHz * Two different laser/ photodiode polarities * Attenuating coating * Packaged with a photodetector The HFE418x-521 is a high-performance 850 nm VCSEL (Vertical Cavity Surface-Emitting Laser) packaged for high-speed data communications. This product combines all the performance advantages of the VCSEL with a custom designed power monitor diode. The power monitor diode can be used with appropriate feedback control circuitry to set a maximum power level for each VCSEL. In addition, built-in power attenuation reduces the effective slope efficiency. These combined features simplify design for high data rate communication and eye safety. Packaged in a fiber receptacle sleeve, this high radiance VCSEL is designed to convert electrical current into optical power that can be used in fiber optic communications and other applications. As the current varies above threshold, the light intensity increases proportionally. Data rates can vary from DC to above 2 Gb/s. The HFE418x-521 is designed to be used with inexpensive silicon or gallium arsenide detectors, but excellent performance can also be achieved with some indium gallium arsenide detectors. The low drive current requirement makes direct drive from PECL (Positive Emitter Coupled Logic) or EML (Emitter Coupled Logic) gates possible and eases driver design. The HFE418x-521 is a prealigned and focused fiber optic transmitter designed to interface with 50/125 and 62.5/125 m multimode fiber. LASER RADIATION AVOID EXPOSURE TO BEAM CLASS 3B LASER PRODUCT Honeywell www.honeywell.com/sensing/VCSEL Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components LC Connectorized VCSEL 1.25Gbps ABSOLUTE MAXIMUM RATINGS Parameter Storage Temperature Operating Temperature Lead Solder Temperature Continuous Optical Output Power (Any Current) Laser Diode Reverse Voltage (IR=10 A) Laser Continuous Forward Current, Heat-Sinked PIN Photodiode Forward Current www..com HFE418x-521 Rating -40 to +85C 0 to +70C 260C, 10 sec. 5 mW 5V 15 mA 10 mA NOTICE Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability. ELECTRO-OPTICAL CHARACTERISTICS (TA=25 oC unless otherwise stated) VCSEL Parameters Peak Fiber Coupled Optical Power (See threshold current and slope efficiency which control power output) Coupling Efficiency Threshold Current Threshold Current Temperature Variation Slope Efficiency Slope Efficiency Temperature Variation Peak Wavelength P Temp Coefficient Spectral Bandwidth Laser Forward Voltage Laser Reverse Voltage Rise and Fall Time Relative Intensity Noise Series Resistance Photodiode Parameters Monitor Current Monitor Current Temperature Variation Dark Current PD Reverse Voltage PD Capacitance Test Condition IF=12 mA Peak 50/125 m fiber NA=0.20 IF=12 mA TA = 0oC to 70oC POC=0.35 mW TA = 0 C to 70 C IF=12mA IF=12 mA IF=12 mA, FWHM IF=12 mA IR=10 A Bias Above Threshold (20%-80%) 1 GHz BW IF=12 mA Test Condition POC=0.35 mW POC=0.35 mW Po=0 mW, VR=3 V Po=0 mW, IR=10 A VR=0 V, Freq=1 MHz VR=3 V, Freq=1 MHz o o Symbol POC Min. Typ. 350 -4.5 Max. Units W dBm % mA mA mW/mA %/ C o Notes 1 PO_PCT ITH ITH /T P P/T VF BVRLD tR tF RIN RS Symbol IPD IPD/T ID BVRPD C 65 3.5 -1.5 0.02 0.04 -0.5 830 850 0.06 1.0 1.6 5 1.8 10 150 200 -128 25 Typ. 0.0 20 30 115 75 40 100 55 2.2 300 300 -122 50 Max. 0.58 860 6 1.5 0.1 2 3 4 nm nm/ oC nm V V ps dB/Hz Ohms Units mA %/ oC nA V pF Notes 5 15 Min. 0.09 6 Notes: 1. Operating power is set by the peak operating current IPEAK=IBIAS+IMODULATION. 2. PO_PCT is defined as the ratio of the coupled power into a 50/125 micron fiber to the total power output from the component as measured on a large area detector. Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com 2 Honeywell * www.honeywell.com/sensing/VCSEL For application help: call 1-800-537-6945 Fiber Optic Components LC Connectorized VCSEL 1.25Gbps 3. Operation at temperatures outside the specified range may result in the threshold current exceeding the maximums defined in the electro-optical characteristics table. 4. Slope efficiency is defined as Po/IF at a total power output of 0.35 mW. Slope efficiency is intentionally lowered to the values shown by optical attenuation. HFE418x-521 5. Rise and fall times are sensitive to drive electronics. 200 ps rise and fall times are achievable for all Honeywell VCSELs. 6. To safeguard the VCSEL from current spike damage, short the VCSEL anode and cathode to each other during photodiode BVR verification testing. TYPICAL PERFORMANCE CURVES www..com Emitted Power vs. Current: Power varies approximately linearly with current above threshold. Threshold Current vs. Temperature: Threshold current varies parabolically with temperature; thus it can be nearly constant for a limited temperature range. Threshold Current Emitted Power Typica l I O P , P O P I TH = I M IN [1.1x 10 -4 (T-T M IN )2 + 1] T M IN , I M IN ITH Curre nt Te m pe ra ture Emission Intensity vs. Wavelength: Typical 10 mA spectrum comprises multiple lines corresponding to multiple transverse modes. NOTICE The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESDinduced damage and/or degradation to equipment, take normal ESD precautions when handling this product. DANGER Emission Intensity FW HM of e nve lope typica lly < 0.5 nm The VCSEL is a class IIIb laser and should be treated as a potential eye hazard. Due to the size of the component, the applicable warning logotype, aperture label, and certification/ identification label cannot be placed on the component itself. These labels can be found on the individual envelope in which the VCSEL unit is packaged, or attached to the shipping package. W a ve le ngth Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com For application help: call 1-800-537-6945 www.honeywell.com/sensingVCSEL Honeywell * 3 Fiber Optic LAN Components LC Connectorized VCSEL 1.25Gbps ORDER GUIDE Catalog Listing HFE4180-521 HFE4181-521 Description Attenuated VCSEL with Back Monitor Photodiode VCSEL Anode Common Attenuated VCSEL with Back Monitor Photodiode VCSEL Cathode Common HFE418x-521 While we provide application assistance, personally and through our literature, it is up to the customer to determine the suitability of the product in the application. Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. SALES AND SERVICE Honeywell Sensing and Control serves its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact a nearby sales office or call: TELEPHONE 1-800-367-6786 (USA) 1-800-737-3360 (Canada) +49 (0) 89 35813310 (Germany) +65-580-3312 (Singapore) +44 (0) 118 981 9511 (UK) MOUNTING DIMENSIONS (for reference only): in./(mm) www..com PINOUT HFE4180-521 Number Function 1 KLD 2 KPD, ALD 3 APD HFE4181-521 Number Function 1 ALD 2 KLD, APD 3 KPD PINOUT DEFINITIONS ALD KLD VCSEL Anode VCSEL Cathode APD KPD Monitor Photodiode Anode Monitor Photodiode Cathode FAX 1-972-470-4326 (Customer Response Center) 1-972-470-4549 (Fax on demand) +49 (0) 89 3599971 (Germany) +65 445 3033 (Singapore) +44 (0) 118 981 7513 (UK) INTERNET http://www.honeywell.com/sensing/VCSEL info.sc@honeywell.com WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Commencing with the date of shipment, Honeywell's warranty runs for 18 months. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. 7/6/01 Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 Printed with Soy Ink on 50% Recycled Paper 006694-1-EN IL50 GLO 797 Printed in USA Honeywell Inc. Optoelectronics Facility 830 East Arapaho Road Richardson, Texas 75081 Honeywell Control Systems Ltd. Zodiac House Calleva Park Aldermaston, Berkshire RG7 8HW England Helping You Control Your World Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components HFE438x-521 SC Connectorized High Speed VCSEL 1.25Gbps FEATURES * Designed for drive currents between 5 and 15 mA * Optimized for low dependence of electrical properties over temperature www..com * High speed 1 GHz * Two different laser/ photodiode polarities * Attenuating coating * Packaged with a photodetector LASER RADIATION AVOID EXPOSURE TO BEAM CLASS 3B LASER PRODUCT The HFE438x-521 is a high-performance 850 nm VCSEL (Vertical Cavity Surface-Emitting Laser) packaged for high-speed data communications. This product combines all the performance advantages of the VCSEL with a custom designed power monitor diode. The power monitor diode can be used with appropriate feedback control circuitry to set a maximum power level for each VCSEL. In addition, built-in power attenuation reduces the effective slope efficiency. These combined features simplify design for high data rate communication and eye safety. Packaged in a fiber receptacle sleeve, this high radiance VCSEL is designed to convert electrical current into optical power that can be used in fiber optic communications and other applications. As the current varies above threshold, the light intensity increases proportionally. The HFE438x-521 is designed to be used with inexpensive silicon or gallium arsenide detectors, but excellent performance can also be achieved with some indium gallium arsenide detectors. The low drive current requirement makes direct drive from PECL (Positive Emitter Coupled Logic) or EML (Emitter Coupled Logic) gates possible and eases driver design. The HFE438x-521 is a prealigned and focused fiber optic transmitter designed to interface with 50/125 and 62.5/125 m multimode fiber. Honeywell www.honeywell.com/sensing/VCSEL Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components SC Connectorized VCSEL 1.25Gbps ABSOLUTE MAXIMUM RATINGS Parameter Storage Temperature Operating Temperature Lead Solder Temperature Continuous Optical Output Power (Any Current) Laser Diode Reverse Voltage (IR=10 A) Laser Continuous Forward Current, Heat-Sinked PIN Photodiode Forward Current www..com HFE438x-521 Rating -40 to +85C 0 to +70C 260C, 10 sec. 5 mW 5V 15 mA 10 mA NOTICE Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability. ELECTRO-OPTICAL CHARACTERISTICS (TA=25 oC unless otherwise stated) VCSEL Parameters Peak Fiber Coupled Optical Power (See threshold current and slope efficiency which control power output) Threshold Current Threshold Current Temperature Variation Slope Efficiency Slope Efficiency Temperature Variation Peak Wavelength P Temp Coefficient Spectral Bandwidth Laser Forward Voltage Laser Reverse Voltage Rise and Fall Time Relative Intensity Noise Series Resistance Photodiode Parameters Monitor Current Monitor Current Temperature Variation Dark Current PD Reverse Voltage PD Capacitance Test Condition IF=12 mA Peak 50/125 m fiber NA=0.20 Symbol POC Min. Typ. 350 -4.5 3.5 -1.5 0.02 0.04 -0.5 830 850 0.06 1.0 1.6 5 1.8 10 150 200 -128 25 Typ. 0.0 20 30 115 75 40 100 55 2.2 300 300 -122 50 Max. 0.58 860 6 1.5 0.1 Max. Units W dBm mA mA mW/mA %/ oC nm nm/ oC nm V V ps dB/Hz Ohms Units mA %/ oC nA V pF Notes 4 Notes 1 ITH TA = 0oC to 70oC POC=0.35 mW TA = 0oC to 70oC IF=12mA IF=12 mA IF=12 mA, FWHM IF=12 mA IR=10 A Bias Above Threshold (20%-80%) 1 GHz BW IF=12 mA Test Condition POC=0.35 mW POC=0.35 mW Po=0 mW, VR=3 V Po=0 mW, IR=10 A VR=0 V, Freq=1 MHz VR=3 V, Freq=1 MHz ITH /T P P/T VF BVRLD tR tF RIN RS Symbol IPD IPD/T ID BVRPD C 2 3 15 Min. 0.09 5 Notes: 1. Operating power is set by the peak operating current IPEAK=IBIAS+IMODULATION. 2. Operation at temperatures outside the specified range may result in the threshold current exceeding the maximums defined in the electro-optical characteristics table. 3. Slope efficiency is defined as Po/IF at a total power output of 0.35 mW. Slope efficiency is intentionally lowered to the values shown by optical attenuation. Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com 2 Honeywell * www.honeywell.com/sensing/VCSEL For application help: call 1-800-537-6945 Fiber Optic Components SC Connectorized VCSEL 1.25Gbps 4. Rise and fall times are sensitive to drive electronics. 200 ps rise and fall times are achievable for all Honeywell VCSELs. 5. To safeguard the VCSEL from current spike damage, short the VCSEL anode and cathode to each other during photodiode BVR verification testing. HFE438x-521 TYPICAL PERFORMANCE CURVES Emitted Power vs. Current: Power varies approximately linearly with current above threshold. www..com Threshold Current vs. Temperature: Threshold current varies parabolically with temperature; thus it can be nearly constant for a limited temperature range. Threshold Current Emitted Power Typica l I O P , P O P I TH = I M IN [1.1x 10 -4 (T-T M IN )2 + 1] T M IN , I M IN ITH Curre nt Te m pe ra ture Emission Intensity vs. Wavelength: Typical 10 mA spectrum comprises multiple lines corresponding to multiple transverse modes. NOTICE The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESDinduced damage and/or degradation to equipment, take normal ESD precautions when handling this product. DANGER Emission Intensity FW HM of e nve lope typica lly < 0.5 nm The VCSEL is a class IIIb laser and should be treated as a potential eye hazard. Due to the size of the component, the applicable warning logotype, aperture label, and certification/ identification label cannot be placed on the component itself. These labels can be found on the individual envelope in which the VCSEL unit is packaged, or attached to the shipping package. W a ve le ngth Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com For application help: call 1-800-537-6945 www.honeywell.com/sensingVCSEL Honeywell * 3 Fiber Optic LAN Components SC Connectorized VCSEL 1.25Gbps ORDER GUIDE Catalog Listing HFE4380-521 HFE4381-521 Description Attenuated VCSEL with Back Monitor Photodiode VCSEL Anode Common Attenuated VCSEL with Back Monitor Photodiode VCSEL Cathode Common HFE438x-521 Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. SALES AND SERVICE Honeywell Sensing and Control serves its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact a nearby sales office or call: TELEPHONE 1-800-367-6786 (USA) 1-800-737-3360 (Canada) +49 (0) 89 35813310 (Germany) +65-580-3312 (Singapore) +44 (0) 118 981 9511 (UK) MOUNTING DIMENSIONS (for reference only): in./(mm) www..com PINOUT HFE4380-521 Number Function 1 KLD 2 KPD, ALD 3 APD HFE4381-521 Number Function 1 ALD 2 KLD, APD 3 KPD FAX 1-972-470-4326 (Customer Response Center) 1-972-470-4549 (Fax on demand) +49 (0) 89 3599971 (Germany) +65 445 3033 (Singapore) +44 (0) 118 981 7513 (UK) INTERNET http://www.honeywell.com/sensing/VCSEL info.sc@honeywell.com PINOUT DEFINITIONS ALD KLD VCSEL Anode VCSEL Cathode APD KPD Monitor Photodiode Anode Monitor Photodiode Cathode WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Commencing with the date of shipment, Honeywell's warranty runs for 18 months. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. While we provide application assistance, personally and through our literature, it is up to the customer to determine the suitability of the product in the application. 7/23/01 Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 Printed with Soy Ink on 50% Recycled Paper 006694-1-EN IL50 GLO 797 Printed in USA Honeywell Inc. Optoelectronics Facility 830 East Arapaho Road Richardson, Texas 75081 Honeywell Control Systems Ltd. Zodiac House Calleva Park Aldermaston, Berkshire RG7 8HW England Helping You Control Your World Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components HFE438x-522 SC Connectorized High Speed VCSEL 1.25Gbps FEATURES * Designed for drive currents between 5 and 15 mA * Optimized for low dependence of electrical properties over temperature www..com * High speed 1 GHz * Two different laser/ photodiode polarities * Attenuating coating also available * Packaged with a photodetector The HFE438x-522 is a high-performance 850 nm VCSEL (Vertical Cavity Surface-Emitting Laser) packaged for high-speed data communications. This product combines all the performance advantages of the VCSEL with a custom designed power monitor diode. The power monitor diode can be used with appropriate feedback control circuitry to set a maximum power level for each VCSEL, simplifying design for high data rate communication and eye safety. LASER RADIATION AVOID EXPOSURE TO BEAM CLASS 3B LASER PRODUCT Packaged in a fiber receptacle sleeve, this high radiance VCSEL is designed to convert electrical current into optical power that can be used in fiber optic communications and other applications. As the current varies above threshold, the light intensity increases proportionally. The HFE438x-522 is designed to be used with inexpensive silicon or gallium arsenide detectors, but excellent performance can also be achieved with some indium gallium arsenide detectors. The low drive current requirement makes direct drive from PECL (Positive Emitter Coupled Logic) or EML (Emitter Coupled Logic) gates possible and eases driver design. The HFE438x-522 is a prealigned and focused fiber optic transmitter designed to interface with 50/125 and 62.5/125 m multimode fiber. Honeywell www.honeywell.com/sensing/VCSEL Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components SC Connectorized VCSEL 1.25Gbps ABSOLUTE MAXIMUM RATINGS Parameter Storage Temperature Operating Temperature Lead Solder Temperature Continuous Optical Output Power (Any Current) Laser Diode Reverse Voltage (IR=10 A) Laser Continuous Forward Current, Heat-Sinked PIN Photodiode Forward Current www..com HFE438x-522 Rating -40 to +85C 0 to +70C 260C, 10 sec. 5 mW 5V 15 mA 10 mA NOTICE Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability. ELECTRO-OPTICAL CHARACTERISTICS (TA=25 oC unless otherwise stated) VCSEL Parameters Peak Fiber Coupled Optical Power (See Threshold current and slope efficiency which control power output) Threshold Current Threshold Current Temperature Variation Slope Efficiency Slope Efficiency Temperature variation Peak Wavelength P Temperature Variation Spectral Bandwidth, RMS Laser Forward Voltage Laser Reverse Voltage Rise and Fall Times Relative Intensity Noise Series Resistance Photodiode Parameters Monitor Current Monitor current Temperature Variation Dark Current PD Reverse Voltage PD Capacitance Test Condition IF=12mA Peak 50/125 m fiber NA = 0.20 Symbol Poc Min. Typ. 1 0 Max. Units mW dBm Notes 1 ITH TA = 0oC to 70oC Poc =1.0mW TA = 0oC to 70oC IF=12mA IF=12mA IF=12mA IF=12 mA IR=10 A Prebias Above Threshold, 20%-80% 1 GHz BW, IF=12mA IF=12 mA Test Conditions Poc =1.0mW Poc =1.0mW Po =0mW, VR=3V Po =0mW, IR=10 A VR=0V, Freq=1MHz VR=3V, Freq=1MHz ITH /T P P/T VF BVRLD tr tf RIN RS Symbol IPD IPD/T ID BVRPD C 1.5 -1.5 0.06 3.5 6 1.5 0.3 mA mA mW/mA %/ oC nm nm/oC nm V V ps dB/Hz Ohms Units mA %/ oC nA V pF 2 3 0.15 -0.5 850 0.06 830 860 0.85 2.2 300 300 -122 40 Max. 0.15 1.6 5 1.8 10 150 200 -128 25 Typ. 0.0 4 18 Min. 0.04 Notes 20 30 115 75 40 100 55 5 Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com 2 Honeywell * www.honeywell.com/sensing/VCSEL For application help: call 1-800-537-6945 Fiber Optic Components SC Connectorized VCSEL 1.25Gbps Notes: 1. Operating power is set by the peak operating current IPEAK=IBIAS+IMODULATION. 2. Operation at temperatures outside the specified range may result in the threshold current exceeding the maximums defined in the electro-optical characteristics table. 3. Slope efficiency is defined as Po/IF at a total power output of 1.0 mW. HFE438x-522 4. Rise and fall times are sensitive to drive electronics. 200 ps rise and fall times are achievable for all Honeywell VCSELs. 5. To safeguard the VCSEL from current spike damage, short the VCSEL anode and cathode to each other during photodiode BVR verification testing. www..com TYPICAL PERFORMANCE CURVES Emitted Power vs. Current: Power varies approximately linearly with current above threshold. Threshold Current vs. Temperature: Threshold current varies parabolically with temperature; thus it can be nearly constant for a limited temperature range. Threshold Current Emitted Power Typica l I O P , P O P I TH = I M IN [1.1x 10 -4 (T-T M IN )2 + 1] T M IN , I M IN ITH Curre nt Te m pe ra ture Emission Intensity vs. Wavelength: Typical 10 mA spectrum comprises multiple lines corresponding to multiple transverse modes. NOTICE The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESDinduced damage and/or degradation to equipment, take normal ESD precautions when handling this product. DANGER Emission Intensity FW HM of e nve lope typica lly < 0.5 nm The VCSEL is a class IIIb laser and should be treated as a potential eye hazard. Due to the size of the component, the applicable warning logotype, aperture label, and certification/ identification label cannot be placed on the component itself. These labels can be found on the individual envelope in which the VCSEL unit is packaged, or attached to the shipping package. W a ve le ngth Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com For application help: call 1-800-537-6945 www.honeywell.com/sensingVCSEL Honeywell * 3 Fiber Optic LAN Components SC Connectorized VCSEL 1.25Gbps ORDER GUIDE Catalog Listing HFE4383-522 HFE4384-522 Description Unattenuated VCSEL with Back Monitor Photodiode VCSEL Anode Common Unattenuated VCSEL with Back Monitor Photodiode VCSEL Cathode Common HFE438x-522 Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. SALES AND SERVICE Honeywell Sensing and Control serves its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact a nearby sales office or call: TELEPHONE 1-800-367-6786 (USA) 1-800-737-3360 (Canada) +49 (0) 89 35813310 (Germany) +65 3546768 (Singapore) +44 (0) 118 981 9511 (UK) 1-972-470-4271 (International) FAX 1-972-470-4326 (Customer Response Center) 1-972-470-4549 (Fax on demand) +49 (0) 89 3599971 (Germany) +65 35436775 (Singapore) +44 (0) 118 981 7513 (UK) INTERNET http://www.honeywell.com/sensing opto@micro.honeywell.com MOUNTING DIMENSIONS (for reference only): in./(mm) www..com PINOUT HFE4383-522 Number Function 1 KLD 2 KPD, ALD 3 APD HFE4384-522 Number Function 1 ALD 2 KLD, APD 3 KPD PINOUT DEFINITIONS ALD KLD VCSEL Anode VCSEL Cathode APD KPD Monitor Photodiode Anode Monitor Photodiode Cathode WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Commencing with the date of shipment, Honeywell's warranty runs for 18 months. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. While we provide application assistance, personally and through our literature, it is up to the customer to determine the suitability of the product in the application. 12/01/00 Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 Printed with Soy Ink on 50% Recycled Paper 006694-1-EN IL50 GLO 797 Printed in USA Honeywell Inc. Optoelectronics Facility 830 East Arapaho Road Richardson, Texas 75081 Honeywell Control Systems Ltd. Zodiac House Calleva Park Aldermaston, Berkshire RG7 8HW England Helping You Control Your World Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components LC SFF Duplex OFE 1.25 Gbps FEATURES * Prealigned Fixed LC Duplex Optical Front End (OFE) * VCSEL packaged with a back monitor photodiode * Common anode and common cathode polarities available * TO-46 hermetic package for www..comVCSEL and Pin + Preamp * 5V or 3.3 V operation * GaAs PIN detector and BiCMOS preamplifier * Differential output for low noise * High Speed >1GHz * Laser signal is attenuated * Unattenuated versions available as well (HFT2183-522 and HFT2184-522) HFT218x-521 The HFT218x-52x is a single package transmitter and receiver designed to interface with the LC style optical connectors. The transmitter is a high performance 850nm VCSEL (Vertical Cavity Surface Emitting Laser) packaged for high speed data communications. This product combines all the performance advantages of VCSEL with a custom designed power monitor diode. The power monitor diode can be used with an appropriate feedback control circuitry to set a maximum power level for each VCSEL. Attenuating coatings are available on the Laser transmitter to simplify design and assist in meeting eye safety requirements. The PIN + preamp converts optical power into a differential output electrical signal. As the light increases, the differential output voltage increases, limiting at input powers above -10dBm. The differential output is designed to be AC coupled into a data amplifier. The Honeywell HFT218x-521 is designed to interface with 50/125 and 62.5/125m multimode fiber within an LC style interface. LASER RADIATION AVOID EXPOSURE TO BEAM CLASS 3B LASER PRODUCT Honeywell Sensing and Control www.honeywell.com/sensing/VCSEL Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components LC SFF Duplex OFE 1.25 Gbps VCSEL PARAMETERS HFT218x-521 ELECTRO-OPTICAL CHARACTERISTICS (TA=25 oC unless otherwise stated) VCSEL Parameters Peak Fiber Coupled Optical Power (See threshold current and slope efficiency which control power output) Threshold Current Threshold Current Temperature Variation www..com Slope Efficiency Slope Efficiency Temperature Variation Peak Wavelength P Temp Coefficient Spectral Bandwidth Laser Forward Voltage Laser Reverse Voltage Rise and Fall Time Relative Intensity Noise Series Resistance Photodiode Parameters Monitor Current Monitor Current Temperature Variation Dark Current PD Reverse Voltage PD Capacitance Test Condition IF=12 mA Peak 50/125 m fiber NA=0.20 Symbol POC Min. Typ. 350 -4.5 3.5 -1.5 0.02 0.04 -0.5 830 850 0.06 1.0 1.6 5 1.8 10 150 200 -128 25 Typ. 0.0 20 30 115 75 40 100 55 2.2 300 300 -122 50 Max. 0.58 860 6 1.5 0.1 Max. Units W dBm mA mA mW/mA %/ oC nm nm/ oC nm V V ps dB/Hz Ohms Units mA %/ oC nA V pF Notes 4 Notes 1 ITH TA = 0oC to 70oC POC=0.35 mW TA = 0oC to 70oC IF=12mA IF=12 mA IF=12 mA, FWHM IF=12 mA IR=10 A Bias Above Threshold (20%-80%) 1 GHz BW IF=12 mA Test Condition POC=0.35 mW POC=0.35 mW Po=0 mW, VR=3 V Po=0 mW, IR=10 A VR=0 V, Freq=1 MHz VR=3 V, Freq=1 MHz ITH /T P P/T VF BVRLD tR tF RIN RS Symbol IPD IPD/T ID BVRPD C 2 3 15 Min. 0.09 5 Notes: 1. 2. 3. 4. 5. Operating power is set by the peak operating current IPEAK=IBIAS+IMODULATION. Operation at temperatures outside the specified range may result in the threshold current exceeding the maximums defined in the electro-optical characteristics table. Slope efficiency is defined as Po/IF at a total power output of 0.35 mW. Slope efficiency is intentionally lowered to the values shown by optical attenuation. Rise and fall times are sensitive to drive electronics. 200 ps rise and fall times are achievable for all Honeywell VCSELs. To safeguard the VCSEL from current spike damage, short the VCSEL anode and cathode to each other during photodiode BVR verification testing. 2 Honeywell Sensing and Control www.honeywell.com/sensing/VCSEL For Application Help: Call 1-800-537-6945 Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components LC SFF Duplex OFE 1.25 Gbps RECEIVER PARAMETERS HFT218x-521 Typ. Max. 5.5 40 500 5000 1 1500 Units Volts mA mV V/W MHz MHz NW dBm dB 60 400 860 ps ps nm Notes 1 1 1 2,3 4 4 5 ELECTRO-OPTICAL CHARACTERISTICS (Vcc=5V, 0C www..com Lower 3dB Bandwidth Symbol Min. Electrical Characteristics Vcc 3.0 Pin = 0W, Rload=50 Icc Pin = 0W, Rload=50 Vout Pin = 100W, Rload=50 Opto-Electronic Characteristics R 2500 Pin = 20W peak, Rload=50 BWlower 0.1 BWupper 850 Pin=0W, Rload=50 937.5MHz BT Filter BER=10-12, SNR=7 S -20 PSRR 10 Pin=0W, Rload=50 Pin=20W peak, Rload=50 Pin=20W peak, Rload=50 Pin=20W peak, Rload=50 PWD TR/TF Test Condition 35 200 3500 0.3 1200 300 -24 30 35 Upper 3dB Bandwidth RMS Output Referred Noise Sensitivity Power Supply Rejection Ratio Pulse Width Distortion Rise/Fall Time Wavelength Responsivity 6 7 8 760 850 Notes: 1. 2. 3. Pin refers to the total optical power at the face of the fiber optic cable input to the HFD3180-002. Responsivity measured with source wavelength of 850nm, 125MHz square wave, Pin=20W peak, Rload=50. The output voltage increases as received light power increases, up to approximately -15dBm. The preamplifier is designed to limit the electrical output signal above this optical input level, and does not introduce signal distortion until the average input power exceeds 0dBm. Bandwidth is measured with a small signal sinusoidal light source with 50 W average power, Rload=50. RMS input referred optical noise is obtained by measuring the RMS output referred noise, then dividing by the responsivity. PSRR is measured from 300KHz to 1GHz by injecting a -20dB electrical signal on the Vcc pin. The nominal value at 100MHz is recorded. No external bypass components are assumed. An external Vcc filter network will greatly increase the PSRR. Measured at the 50% level of output pulses using 0.5 GHz square wave with <200 ps rise time. Rise and fall times are measured with source wavelength of 850nm, 125MHz square wave, with optical rise and fall times < 200ps, Pin=20W peak, Rload=50. 4. 5. 6. 7. 8. 3 Honeywell Sensing and Control www.honeywell.com/sensing/VCSEL For Application Help: Call 1-800-537-6945 Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components LC SFF Duplex OFE 1.25 Gbps Absolute Maximum Ratings Parameter Storage Temperature Operating Temperature Lead Solder Temperature Continuous Optical Output Power (Any Current) Laser Diode Reverse Voltage (IR=10 A) Laser Continuous Forward Current, Heat-Sinked PIN Photodiode Forward Current www..com Power Supply Voltage (PIN + Preamp) HFT218x-521 Rating -40 to +85C 0 to +70C 260C, 10 sec. 5 mW 5V 15 mA 10 mA 6V 0 dBm average, +4 dBm peak Incident Optical Power NOTICE Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability. NOTICE The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESD-induced damage and/or degradation to equipment, take normal ESD precautions when handling this product ORDER GUIDE Catalog Listing HFT2180-521 HFT2181-521 Description Attenuated, Common Anode Attenuated, Common Cathode Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com 4 Honeywell Sensing and Control www.honeywell.com/sensing/VCSEL For application help: call 1-800-537-6945 Fiber Optic LAN Components LC SFF Duplex OFE 1.25 Gbps TYPICAL PERFORMANCE CURVES Emitted Power vs. Current: Power varies approximately linearly with current above threshold. HFT218x-521 Threshold Current vs. Temperature: Threshold current varies parabolically with temperature; thus it can be nearly constant for a limited temperature range. Emitted Power Threshold Current Typica l I O P , P O P I TH = I MIN [1.1x10-4 (T-T M IN )2 +1] www..com T M IN , I M IN ITH Current Temperature Emission Intensity vs. Wavelength: Typical 10 mA spectrum comprises multiple lines corresponding to multiple transverse modes. NOTICE The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESDinduced damage and/or degradation to equipment, take normal ESD precautions when handling this product. DANGER Emission Intensity FW HM of e nve lope typica lly <0.5 nm The VCSEL is a class IIIb laser and should be treated as a potential eye hazard. Due to the size of the component, the applicable warning logotype, aperture label, and certification/ identification label cannot be placed on the component itself. These labels can be found on the individual envelope in which the VCSEL unit is packaged, or attached to the shipping package. W a ve le ngth 5 Honeywell Sensing and Control www.honeywell.com/sensing/VCSEL For application help: call 1-800-537-6945 Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components LC SFF Duplex OFE 1.25 Gbps FIGURE 1: INTERNAL SCHEMATIC DIAGRAM OF THE HFD3180-002 Vcc HFT218x-521 Inverted Output www..com Non-Inverted Preamplifier PIN Internal Limiting Amplifier Ground FIGURE 2: RECOMMENDED INTERFACE CIRCUIT FOR THE HFD3180-002 HFD3180 R Vcc C1 Ground Inverted Output 50 ohm transmission line Non-Inverted Output 50 ohm transmission line C2 C2 Limiting Amplifier or Test Equipment Input Input R=10= C1 = 10 nF C2 = DATA RATE DEPENDANT (22NF FOR RATES > 1GB 6 Honeywell Sensing and Control www.honeywell.com/sensing/VCSEL For application help: call 1-800-537-6945 Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components LC SFF Duplex OFE 1.25 Gbps HFT218x-521 www..com 7 Honeywell Sensing and Control www.honeywell.com/sensing/VCSEL For application help: call 1-800-537-6945 Fiber Optic LAN Components LC SFF Duplex OFE 1.25 Gbps WARRANTY/REMEDY HFT218x-521 Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Commencing with the date of shipment, Honeywell's warranty runs for 18 months. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. While we provide application assistance, personally and through our literature, it is up to the customer to determine the suitability of the product in the application. www..com Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. SALES AND SERVICE Honeywell Sensing and Control serves its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact a nearby sales office or call: TELEPHONE 1-800-367-6786 (USA) 1-800-737-3360 (Canada) +49 (0) 89 35813310 (Germany) +65-580-3312 (Singapore) +44 (0) 118 981 9511 (UK) FAX 1-972-470-4326 (Customer Response Center) 1-972-470-4549 (Fax on demand) +49 (0) 89 3599971 (Germany) +65 445 3033 (Singapore) +44 (0) 118 981 7513 (UK) INTERNET http://www.honeywell.com/sensing/VCSEL info.sc@honeywell.com 7/23/01 Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 Printed with Soy Ink on 50% Recycled Paper PK XXXX X DMM Printed in USA Honeywell Inc. Optoelectronics Facility 830 East Arapaho Road Richardson, Texas 75081 Honeywell Control Systems Ltd. Zodiac House Calleva Park Aldermaston, Berkshire RG7 8HW England Helping You Control Your World Fiber Optic LAN Components LC SFF Duplex OFE 1.25 Gbps FEATURES * Prealigned Pluggable LC Duplex Optical Front End (OFE) in compliance with the SFF Pluggable Transceiver MultiSource Agreement. * VCSEL packaged with a back monitor photodiode www..comCommon anode and common * cathode polarities available * TO-46 hermetic package for VCSEL and Pin + Preamp * 5V or 3.3 V operation * GaAs PIN detector and BiCMOS preamplifier * Differential output for low noise * High Speed >1GHz * Laser signal is attenuated * Unattenuated versions available as well (HFT2283-522 and HFT2284-522) HFT228x-521 The HFT228x-52x is a single package transmitter and receiver designed to interface with the LC style optical connectors. The transmitter is a high performance 850nm VCSEL (Vertical Cavity Surface Emitting Laser) packaged for high speed data communications. This product combines all the performance advantages of VCSEL with a custom designed power monitor diode. The power monitor diode can be used with an appropriate feedback control circuitry to set a maximum power level for each VCSEL. Attenuating coatings are available on the Laser transmitter to simplify design and assist in meeting eye safety requirements. The PIN + preamp converts optical power into a differential output electrical signal. As the light increases, the differential output voltage increases, limiting at input powers above -10dBm. The differential output is designed to be AC coupled into a data amplifier. The Honeywell HFT228x-521 is designed to interface with 50/125 and 62.5/125m multimode fiber within an LC style interface. LASER RADIATION AVOID EXPOSURE TO BEAM CLASS 3B LASER PRODUCT Honeywell www.honeywell.com/sensing/VCSEL Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components LC SFF Duplex OFE 1.25 Gbps VCSEL PARAMETERS HFT228x-521 ELECTRO-OPTICAL CHARACTERISTICS (TA=25 oC unless otherwise stated) VCSEL Parameters Peak Fiber Coupled Optical Power (See threshold current and slope efficiency which control power output) Threshold Current Threshold Current Temperature Variation www..com Slope Efficiency Slope Efficiency Temperature Variation Peak Wavelength P Temp Coefficient Spectral Bandwidth Laser Forward Voltage Laser Reverse Voltage Rise and Fall Time Relative Intensity Noise Series Resistance Photodiode Parameters Monitor Current Monitor Current Temperature Variation Dark Current PD Reverse Voltage PD Capacitance Test Condition IF=12 mA Peak 50/125 m fiber NA=0.20 Symbol POC Min. Typ. 350 -4.5 3.5 -1.5 0.02 0.04 -0.5 830 850 0.06 1.0 1.6 5 1.8 10 150 200 -128 25 Typ. 0.0 20 30 115 75 40 100 55 2.2 300 300 -122 50 Max. 0.58 860 6 1.5 0.1 Max. Units W dBm mA mA mW/mA %/ oC nm nm/ oC nm V V ps dB/Hz Ohms Units mA %/ oC nA V pF Notes 4 Notes 1 ITH TA = 0oC to 70oC POC=0.35 mW TA = 0oC to 70oC IF=12mA IF=12 mA IF=12 mA, FWHM IF=12 mA IR=10 A Bias Above Threshold (20%-80%) 1 GHz BW IF=12 mA Test Condition POC=0.35 mW POC=0.35 mW Po=0 mW, VR=3 V Po=0 mW, IR=10 A VR=0 V, Freq=1 MHz VR=3 V, Freq=1 MHz ITH /T P P/T VF BVRLD tR tF RIN RS Symbol IPD IPD/T ID BVRPD C 2 3 15 Min. 0.09 5 Notes: 1. 2. 3. 4. 5. Operating power is set by the peak operating current IPEAK=IBIAS+IMODULATION. Operation at temperatures outside the specified range may result in the threshold current exceeding the maximums defined in the electro-optical characteristics table. Slope efficiency is defined as Po/IF at a total power output of 0.35 mW. Slope efficiency is intentionally lowered to the values shown by optical attenuation. Rise and fall times are sensitive to drive electronics. 200 ps rise and fall times are achievable for all Honeywell VCSELs. To safeguard the VCSEL from current spike damage, short the VCSEL anode and cathode to each other during photodiode BVR verification testing. 2 Honeywell www.honeywell.com/sensing/VCSEL For Application Help: Call 1-800-537-6945 Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components LC SFF Duplex OFE 1.25 Gbps RECEIVER PARAMETERS HFT228x-521 Typ. Max. 5.5 40 500 5000 1 1500 Units Volts mA mV V/W MHz MHz NW dBm dB 60 400 860 ps ps nm Notes 1 1 1 2,3 4 4 5 ELECTRO-OPTICAL CHARACTERISTICS (Vcc=5V, 0C www..com Lower 3dB Bandwidth Symbol Min. Electrical Characteristics Vcc 3.0 Pin = 0W, Rload=50 Icc Pin = 0W, Rload=50 Vout Pin = 100W, Rload=50 Opto-Electronic Characteristics R 2500 Pin = 20W peak, Rload=50 BWlower 0.1 BWupper 850 Pin=0W, Rload=50 937.5MHz BT Filter BER=10-12, SNR=7 S -20 PSRR 10 Pin=0W, Rload=50 Pin=20W peak, Rload=50 Pin=20W peak, Rload=50 Pin=20W peak, Rload=50 PWD TR/TF Test Condition 35 200 3500 0.3 1200 300 -24 30 35 Upper 3dB Bandwidth RMS Output Referred Noise Sensitivity Power Supply Rejection Ratio Pulse Width Distortion Rise/Fall Time Wavelength Responsivity 6 7 8 760 850 Notes: 1. 2. 3. Pin refers to the total optical power at the face of the fiber optic cable input to the HFD3180-002. Responsivity measured with source wavelength of 850nm, 125MHz square wave, Pin=20W peak, Rload=50. The output voltage increases as received light power increases, up to approximately -15dBm. The preamplifier is designed to limit the electrical output signal above this optical input level, and does not introduce signal distortion until the average input power exceeds 0dBm. Bandwidth is measured with a small signal sinusoidal light source with 50 W average power, Rload=50. RMS input referred optical noise is obtained by measuring the RMS output referred noise, then dividing by the responsivity. PSRR is measured from 300KHz to 1GHz by injecting a -20dB electrical signal on the Vcc pin. The nominal value at 100MHz is recorded. No external bypass components are assumed. An external Vcc filter network will greatly increase the PSRR. Measured at the 50% level of output pulses using 0.5 GHz square wave with <200 ps rise time. Rise and fall times are measured with source wavelength of 850nm, 125MHz square wave, with optical rise and fall times < 200ps, Pin=20W peak, Rload=50. 4. 5. 6. 7. 8. 3 Honeywell www.honeywell.com/sensing/VCSEL For Application Help: Call 1-800-537-6945 Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components LC SFF Duplex OFE 1.25 Gbps Absolute Maximum Ratings Parameter Storage Temperature Operating Temperature Lead Solder Temperature Continuous Optical Output Power (Any Current) Laser Diode Reverse Voltage (IR=10 A) Laser Continuous Forward Current, Heat-Sinked PIN Photodiode Forward Current www..com Power Supply Voltage (PIN + Preamp) HFT228x-521 Rating -40 to +85C 0 to +70C 260C, 10 sec. 5 mW 5V 15 mA 10 mA 6V 0 dBm average, +4 dBm peak Incident Optical Power NOTICE Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability. NOTICE The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESD-induced damage and/or degradation to equipment, take normal ESD precautions when handling this product ORDER GUIDE Catalog Listing HFT2280-521 HFT2281-521 Description Attenuated, Common Anode Attenuated, Common Cathode Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com 4 Honeywell www.honeywell.com/sensing/VCSEL For application help: call 1-800-537-6945 Fiber Optic LAN Components LC SFF Duplex OFE 1.25 Gbps TYPICAL PERFORMANCE CURVES Emitted Power vs. Current: Power varies approximately linearly with current above threshold. HFT228x-521 Threshold Current vs. Temperature: Threshold current varies parabolically with temperature; thus it can be nearly constant for a limited temperature range. Emitted Power Threshold Current Typica l I O P , P O P I TH = I MIN [1.1x10-4 (T-T M IN )2 +1] www..com T M IN , I M IN ITH Current Temperature Emission Intensity vs. Wavelength: Typical 10 mA spectrum comprises multiple lines corresponding to multiple transverse modes. NOTICE The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESDinduced damage and/or degradation to equipment, take normal ESD precautions when handling this product. DANGER Emission Intensity FW HM of e nve lope typica lly <0.5 nm The VCSEL is a class IIIb laser and should be treated as a potential eye hazard. Due to the size of the component, the applicable warning logotype, aperture label, and certification/ identification label cannot be placed on the component itself. These labels can be found on the individual envelope in which the VCSEL unit is packaged, or attached to the shipping package. W a ve le ngth 5 Honeywell www.honeywell.com/sensing/VCSEL For application help: call 1-800-537-6945 Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components LC SFF Duplex OFE 1.25 Gbps FIGURE 1: INTERNAL SCHEMATIC DIAGRAM OF THE HFD3180-002 Vcc HFT228x-521 Inverted Output www..com Non-Inverted Preamplifier PIN Internal Limiting Amplifier Ground FIGURE 2: RECOMMENDED INTERFACE CIRCUIT FOR THE HFD3180-002 HFD3180 R Vcc C1 Ground Inverted Output 50 ohm transmission line Non-Inverted Output 50 ohm transmission line C2 C2 Limiting Amplifier or Test Equipment Input Input R=10= C1 = 10 nF C2 = DATA RATE DEPENDANT (22NF FOR RATES > 1GB 6 Honeywell www.honeywell.com/sensing/VCSEL For application help: call 1-800-537-6945 Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components LC SFF Duplex OFE 1.25 Gbps HFT228x-521 www..com 7 Honeywell www.honeywell.com/sensing/VCSEL For application help: call 1-800-537-6945 Fiber Optic LAN Components LC SFF Duplex OFE 1.25 Gbps WARRANTY/REMEDY HFT228x-521 Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Commencing with the date of shipment, Honeywell's warranty runs for 18 months. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. While we provide application assistance, personally and through our literature, it is up to the customer to determine the suitability of the product in the application. www..com Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. SALES AND SERVICE Honeywell Sensing and Control serves its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact a nearby sales office or call: TELEPHONE 1-800-367-6786 (USA) 1-800-737-3360 (Canada) +49 (0) 89 35813310 (Germany) +65-580-3312 (Singapore) +44 (0) 118 981 9511 (UK) FAX 1-972-470-4326 (Customer Response Center) 1-972-470-4549 (Fax on demand) +49 (0) 89 3599971 (Germany) +65 445 3033 (Singapore) +44 (0) 118 981 7513 (UK) INTERNET http://www.honeywell.com/sensing/VCSEL info.sc@honeywell.com 8/30/01 Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 Printed with Soy Ink on 50% Recycled Paper PK XXXX X DMM Printed in USA Honeywell Inc. Optoelectronics Facility 830 East Arapaho Road Richardson, Texas 75081 Honeywell Control Systems Ltd. Zodiac House Calleva Park Aldermaston, Berkshire RG7 8HW England Helping You Control Your World Fiber Optic LAN Components Connectorized PIN Plus Preamplifier FEATURES * Prealigned LC SFF Connector sleeve * Data rates from 622 Mbps to 2.5 Gbps * PIN detector and preamplifier in a TO-46 heremtic package * 3.3V operation www..comGaAs PIN detector and * BiCMOS preamplifier * Differential Output for low noise * 2.4 GHz typical Bandwidth HFD3180-102 The HFD3180-102 is a high-performance 850nm GaAs detector and preamplifier packaged for high-speed data communications. The product is designed for ease of use by the module designer or manufacturer for data rates from 622 Mbps to 2.5 Gbps. The HFD3180-102 converts optical power into an electrical signal that is used in fiber optic communications and other applications. As the light increases, the output voltage increases, limiting at input powers above -10dBm. The differential output is designed to be AC coupled into a data amplifier. The pre-aligned and lensed package with an industry standard LC SFF style connector sleeve, allows for "drop in" assembly to reduce manufacturing cost. The Honeywell HFD3180-102 is designed to interface with 50/125 and 62.5/125mm multimode fiber. Honeywell Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components Connectorized PIN Plus Preamplifier ABSOLUTE MAXIMUM RATINGS Parameter Storage Temperature Case Operating Temperature Lead Solder Temperature Power Supply Voltage Incident Optical Power Rating -40 to +85C 0 to +70C 260C, 10 sec. -0.5 to +3.8 V 0 dBm average, +4 dBm peak HFD3180-102 NOTICE Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability. www..com ELECTRO-OPTICAL CHARACTERISTICS (Vcc=3.3V, AC coupled to 50, 0C Parameters Supply Voltage Supply Current Output Offset Voltage Output Resistance Responsivity Differential Output Voltage Upper 3dB Bandwidth RMS Output Referred Noise Sensitivity Power Supply Rejection Ratio Pulse Width Distortion Rise/Fall Time Wavelength Responsivity AGCth threshold power 400 2500 2.25 6 7 8 9,10 760 850 60 Notes: 1. 2. 3. Pin refers to the peak optical power at the face of the fiber optic cable input to the HFD3180-102. Responsivity measured with source wavelength of 850nm, freq = 0Hz, Pin< AGCth, Rload=50, sample tested at 2.5Gbps The output voltage increases as received light power increases, up to approximately -15dBm depending upon the AGCth. The preamplifier is designed to limit the electrical output signal above this optical input level, and does not introduce signal distortion until the average input power exceeds 0dBm. Bandwidth is measured with a small signal sinusoidal light source with 50 W average power, Rload=50. RMS input referred optical noise is sample tested by measuring the RMS output referred noise, then dividing by the responsivity. PSRR is sample tested from 300KHz to 1GHz by injecting a - 20dB electrical signal on the Vcc pin. The nominal value at 100MHz is recorded. No external bypass components are assumed. An external Vcc filter network will greatly increase the PSRR. 7. Sample tested at the 50% level of output pulses. 8. Rise and fall times are sample tested with source wavelength of 850nm, 125MHz square wave, with optical rise and fall times < 200ps, Pin< AGCth, Rload=50. Measured at 20% - 80% signal levels 9. Output offset voltage is defined as Vout - VoutQ with no light 10. The AGCth power depends on the offset voltage. Refer to fig 3. 4. 5. 6. NOTICE The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESDinduced damage and/or degradation to equipment, take normal ESD precautions when handling this product Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com 2 Honeywell * For application help: call 1-800-537-6945 Fiber Optic LAN Components Connectorized PIN Plus Preamplifier FIGURE 1: INTERNAL SCHEMATIC DIAGRAM OF THE HFD3180-102 Vcc 50 300pF 270 Automatic Gain Control 50 Data 100pF Data HFD3180-102 www..com Case Ground FIGURE 2: RECOMMENDED INTERFACE CIRCUIT FOR THE HFD3180-102 HFD30XX HFD31XX HFD33XX VCC 10nF Case Ground Data 50 T-Lines Data 22nF 100 Limiting Amplifier or Vcc 10 Test Equipment Note: 100 terminating resistor is optional R=10= C1 = 10 nF C2 = Data rate dependant (22nF for rates > 1Gbps FIGURE 3: AGC THRESHOLD POWER VS. OUTPUT OFFSET VOLTAGE HFD3180-102 AGC THRESHOLD POWER VS. OUTPUT OFFSET VOLTAGE 120 110 100 100C, 3.0V 50C, 3.3V 0C, 3.6V AGC Threshold Power W 90 80 70 60 50 40 30 20 10 0 -100 -80 -60 -40 -20 0 20 40 60 80 100 OUTPUT OFFSET VOLTAGE (mV) Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com For application help: call 1-800-537-6945 Honeywell * 3 Fiber Optic LAN Components Connectorized PIN Plus Preamplifier ORDER GUIDE Catalog Listing HFD3180-102 Description Connectorized PIN Plus Preamplifier HFD3180-102 SALES AND SERVICE Honeywell Sensing and Control serves its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact a nearby sales office or call: TELEPHONE 1-800-367-6786 (USA) 1-800-737-3360 (Canada) +49 (0) 89 35813310 (Germany) +65-580-3312 (Singapore) +44 (0) 118 981 9511 (UK) MOUNTING DIMENSIONS (for reference only) in./(mm) CURRENT DIMENSIONS www..com PINOUT Number 1 2 3 4 Function VCC Inverted Output (VoutQ) Ground Non Inverted Output (Vout) FAX 1-972-470-4326 (Customer Response Center) 1-972-470-4549 (Fax on demand) +49 (0) 89 3599971 (Germany) +65 445 3033 (Singapore) +44 (0) 118 981 7513 (UK) INTERNET http://www.honeywell.com/VCSEL VCSEL@HONEYWELL.COM WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Commencing with the date of shipment, Honeywell's warranty runs for 18 months. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. While we provide application assistance, personally and through our literature, it is up to the customer to determine the suitability of the product in the application. Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. 02/01/02 Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 Printed with Soy Ink on 50% Recycled Paper 006697-1-EN IL50 GLO 797 Printed in USA Honeywell Inc. Optoelectronics Facility 830 East Arapaho Road Richardson, Texas 75081 Honeywell Control Systems Ltd. Zodiac House Calleva Park Aldermaston, Berkshire RG7 8HW England Helping You Control Your World Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components Connectorized PIN Plus Preamplifier Future Dimension (available starting late February 2002) Preliminary HFD3180-102 www..com Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 Honeywell Inc. Optoelectronics Facility 830 East Arapaho Road Richardson, Texas 75081 Honeywell Control Systems Ltd. Zodiac House Calleva Park Aldermaston, Berkshire RG7 8HW England Helping You Control Your World Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com PK XXXX X DMM Printed in USA Fiber Optic LAN Components Connectorized PIN Plus Preamplifier FEATURES * Prealigned SC Connector sleeve * Data rates from 622 Mbps to 2.5 Gbps * PIN detector and preamplifier in a TO-46 heremtic package * 3.3V operation * GaAs PIN detector and www..comBiCMOS preamplifier * Differential Output for low noise * 2.4 GHz typical Bandwidth HFD3381-102 The HFD3381-102 is a high-performance 850nm GaAs detector and preamplifier packaged for high-speed data communications. The product is designed for ease of use by the module designer or manufacturer for data rates from 622 Mbps to 2.5 Gbps. The HFD3381-102 converts optical power into an electrical signal that is used in fiber optic communications and other applications. As the light increases, the output voltage increases, limiting at input powers above -10dBm. The differential output is designed to be AC coupled into a data amplifier. The pre-aligned and lensed package with an industry standard SC style connector sleeve, allows for "drop in" assembly to reduce manufacturing cost. The Honeywell HFD3381-102 is designed to interface with 50/125 and 62.5/125mm multimode fiber. Honeywell Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components Connectorized PIN Plus Preamplifier ABSOLUTE MAXIMUM RATINGS Parameter Storage Temperature Case Operating Temperature Lead Solder Temperature Power Supply Voltage Incident Optical Power Rating -40 to +85C 0 to +70C 260C, 10 sec. -0.5 to +3.8 V 0 dBm average, +4 dBm peak HFD3381-102 NOTICE Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability. www..com ELECTRO-OPTICAL CHARACTERISTICS (Vcc=3.3V, AC coupled to 50, 0C Parameters Supply Voltage Supply Current Output Offset Voltage Output Resistance Responsivity Differential Output Voltage Upper 3dB Bandwidth RMS Output Referred Noise Sensitivity Power Supply Rejection Ratio Pulse Width Distortion Rise/Fall Time Wavelength Responsivity AGCth threshold power 400 2500 2.25 6 7 8 9,10 760 850 60 Notes: 1. 2. 3. Pin refers to the peak optical power at the face of the fiber optic cable input to the HFD3381-102. Responsivity measured with source wavelength of 850nm, freq = 0Hz, Pin< AGCth, Rload=50, sample tested at 2.5Gbps The output voltage increases as received light power increases, up to approximately -15dBm depending upon the AGCth. The preamplifier is designed to limit the electrical output signal above this optical input level, and does not introduce signal distortion until the average input power exceeds 0dBm. Bandwidth is measured with a small signal sinusoidal light source with 50 W average power, Rload=50. RMS input referred optical noise is sample tested by measuring the RMS output referred noise, then dividing by the responsivity. PSRR is sample tested from 300KHz to 1GHz by injecting a - 20dB electrical signal on the Vcc pin. The nominal value at 100MHz is recorded. No external bypass components are assumed. An external Vcc filter network will greatly increase the PSRR. 7. Sample tested at the 50% level of output pulses. 8. Rise and fall times are sample tested with source wavelength of 850nm, 125MHz square wave, with optical rise and fall times < 200ps, Pin< AGCth, Rload=50. Measured at 20% - 80% signal levels 9. Output offset voltage is defined as Vout - VoutQ with no light 10. The AGCth power depends on the offset voltage. Refer to fig 3. 4. 5. 6. NOTICE The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESDinduced damage and/or degradation to equipment, take normal ESD precautions when handling this product Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com 2 Honeywell * For application help: call 1-800-537-6945 Fiber Optic LAN Components Connectorized PIN Plus Preamplifier FIGURE 1: INTERNAL SCHEMATIC DIAGRAM OF THE HFD3381-102 Vcc 50 300pF 270 Automatic Gain Control 50 Data 100pF Data HFD3381-102 www..com Case Ground FIGURE 2: RECOMMENDED INTERFACE CIRCUIT FOR THE HFD3381-102 HFD30XX HFD31XX HFD33XX VCC 10nF Case Ground Data 50 T-Lines Data 22nF 100 Limiting Amplifier or Vcc 10 Test Equipment Note: 100 terminating resistor is optional R=10= C1 = 10 nF C2 = Data rate dependant (22nF for rates > 1Gbps FIGURE 3: AGC THRESHOLD POWER VS. OUTPUT OFFSET VOLTAGE HFD3180-102 AGC THRESHOLD POWER VS. OUTPUT OFFSET VOLTAGE 120 110 100 100C, 3.0V 50C, 3.3V 0C, 3.6V AGC Threshold Power W 90 80 70 60 50 40 30 20 10 0 -100 -80 -60 -40 -20 0 20 40 60 80 100 OUTPUT OFFSET VOLTAGE (mV) Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com For application help: call 1-800-537-6945 Honeywell * 3 Fiber Optic LAN Components Connectorized PIN Plus Preamplifier ORDER GUIDE Catalog Listing HFD3381-102 Description Connectorized PIN Plus Preamplifier HFD3381-102 Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. SALES AND SERVICE Honeywell Sensing and Control serves its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact a nearby sales office or call: TELEPHONE 1-800-367-6786 (USA) 1-800-737-3360 (Canada) +49 (0) 89 35813310 (Germany) +65-580-3312 (Singapore) +44 (0) 118 981 9511 (UK) MOUNTING DIMENSIONS (for reference only) in./(mm) www..com PINOUT Number 1* 2 3 4 Function VCC Inverted Output Ground Non Inverted Output FAX 1-972-470-4326 (Customer Response Center) 1-972-470-4549 (Fax on demand) +49 (0) 89 3599971 (Germany) +65 445 3033 (Singapore) +44 (0) 118 981 7513 (UK) INTERNET http://www.honeywell.com/VCSEL VCSEL@honeywell.com Aligned with the Receptacle notch VCC is cut shorter WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Commencing with the date of shipment, Honeywell's warranty runs for 18 months. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. While we provide application assistance, personally and through our literature, it is up to the customer to determine the suitability of the product in the application. 01/31/02 Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 Printed with Soy Ink on 50% Recycled Paper 006697-1-EN IL50 GLO 797 Printed in USA Honeywell Inc. Optoelectronics Facility 830 East Arapaho Road Richardson, Texas 75081 Honeywell Control Systems Ltd. Zodiac House Calleva Park Aldermaston, Berkshire RG7 8HW England Helping You Control Your World Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components PIN Plus Preamplifier FEATURES * TO-46 hermetic package * Data rates from DC to 2.5Gbps InGaAs PIN detector and BiCMOS preamplifier * Operation at 3.3V * Differential output for low noise * 2.3GHz typical Bandwidth Preliminary HFD3041-102 www..com The HFD3041-102 is a high-performance 1300nm integrated InGaAs detector (80micron active area) and pre-amplifier TO-46 hermetic component, the product is designed for ease of use in modules designed for 2.5GB/s data rate. The HFD3041-102 converts optical power into a differential output electrical signal that is used in fiber optic communications and other applications. As the light increases, the differential output voltage increases. Above peak optical powers of approximately -12dBm, AGC circuitry in the TIA limits the optical voltage swings. The differential output is designed to be AC coupled to a 50 ohm load impedance pulled down to ground prior to any post amplification stages. The component requires alignment in a lens system which focuses the light onto the photodiode active area. To achieve the full specified operational bandwidth, it is recommended that the products component leads at attached to within 0.10" of the receptacle with a controlled impedance path. The Honeywell HFD3041-102 is designed to interface with 50/125 and 62.5/125mm multimode fiber. Honeywell VCSEL Products Preliminary Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components PIN Plus Preamplifier ABSOLUTE MAXIMUM RATINGS Parameter Storage Temperature Case Operating Temperature Lead Solder Temperature Power Supply Voltage Incident Optical Power Rating -40 to +85C -40 to +85C 260C, 10 sec. -0.5V to 3.8V 0 dBm average, +4 dBm peak Preliminary HFD3041-102 NOTICE Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability. www..com ELECTRO-OPTICAL CHARACTERISTICS (Vcc=3.3V, AC coupled to 50, 0C 8. Parameters Active Area Input Optical Wavelength Responsivity Differential Output Voltage Swing Supply Current -3dB Optical/Electrical Bandwidth Low Frequency -3dB Cutoff RMS Input Referred Noise Equivalent Power Power Supply Rejection Ratio Pulse Width Distortion Rise/Fall Time AGC Threshold Power Min. 1200 1.3 0.10 Typ. 80 1310 2.7 0.20 25 1.8 Max. 1600 4.2 Units m nm mV/W V Notes 1,2,7 1.6 40 2.5 0 mA GHz KHz W dB 1 1,3 1,3 4 1,8 1,5 1,6,7 9 0.50 30 0.65 105 150 65 60 170 ps ps W Notes: 1. 2. PR is the average optical power incident on the component window, subject to note 7. Responsivity measured with source wavelength of 1310nm, with light source modulated at 250MHz. Peak received optical power 5. 6. NOTICE The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESD-induced damage and/or degradation to equipment, take normal ESD precautions when handling this product 7. Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com 2 Honeywell * VCSEL Products Division Preliminary For application help: call 1-800-537-6945 Fiber Optic LAN Components PIN Plus Preamplifier FIGURE 1: INTERNAL SCHEMATIC DIAGRAM OF THE HFD3381-102 Vcc 50 300pF 270 Automatic Gain Control 50 Data www..com Preliminary HFD3041-102 100pF Data Case Ground FIGURE 2: RECOMMENDED INTERFACE CIRCUIT FOR THE HFD3381-102 HFD30XX HFD31XX HFD33XX VCC 10nF Case Ground Data 50 T-Lines Data Vcc 10 Limiting Amplifier 22nF 100 or Test Equipment Note: 100 terminating resistor is optional R=10= C1 = 10 nF C2 = Data rate dependant (22nF for rates > 1Gbps) Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com For application help: call 1-800-537-6945 Preliminary Honeywell * VCSEL Products Division 3 Fiber Optic LAN Components PIN Plus Preamplifier ORDER GUIDE Catalog Listing HFD3041-102 Description PIN Plus Preamplifier, TO-46 Component Preliminary HFD3041-102 SALES AND SERVICE MICRO SWITCH Sensing and Control serves its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact a nearby sales office or call: TELEPHONE 1-800-367-6786 (USA) 1-800-737-3360 (Canada) +49 (0) 89 35813310 (Germany) +65-580-3312 (Singapore) +44 (0) 118 981 9511 (UK) MOUNTING DIMENSIONS (for reference only) in./(mm) www..com FAX 1-972-470-4326 (Customer Response Center) 1-972-470-4549 (Fax on demand) +49 (0) 89 3599971 (Germany) +65 445 3033 (Singapore) +44 (0) 118 981 7513 (UK) PINOUT Number 1 2 3 4 Function VCC Inverted Output Ground Non-Inverted Output INTERNET http://www.honeywell.com/VCSEL vcsel@honeywell.com WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Commencing with the date of shipment, Honeywell's warranty runs for 18 months. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. While we provide application assistance, personally and through our literature, it is up to the customer to determine the suitability of the product in the application. Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. Preliminary VCSEL Products Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 Printed with Soy Ink on 50% Recycled Paper 006697-1-EN IL50 GLO 797 Printed in USA 03/07/02 VCSEL Products Honeywell Inc. Optoelectronics Facility 830 East Arapaho Road Richardson, Texas 75081 Honeywell Control Systems Ltd. Zodiac House Calleva Park Aldermaston, Berkshire RG7 8HW England Helping You Control Your World Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components PIN Plus Preamplifier FEATURES * TO-46 hermetic package * Data rates from DC to 2.5 Gbps * InGaAs PIN detector and BiCMOS preamplifier * Operation at 3.3V * Differential output for low noise * 2.3GHz typical Bandwidth Preliminary HFD3041-103 www..com The HFD3041-103 is a high-performance 1300nm integrated InGaAs detector (40micron active area) and pre-amplifier TO-46 hermetic component, the product is designed for ease of use in modules designed for 2.5GB/s data rate. The HFD3041-103 converts optical power into a differential output electrical signal that is used in fiber optic communications and other applications. As the light increases, the differential output voltage increases. Above peak optical powers of approximately -11.5dBm, AGC circuitry in the TIA limits the optical voltage swings. The differential output is designed to be AC coupled to a 50 ohm load impedance pulled down to ground prior to any post amplification stages. The component requires alignment in a lens system which focuses the light onto the photodiode active area. To achieve the full specified operational bandwidth, it is recommended tha the products component leads at attached to within 0.10" of the receptacle with a controlled impedance path. The Honeywell HFD3041-103 is designed to interface with single mode fiber. Honeywell VCSEL Products Preliminary Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components PIN Plus Preamplifier ABSOLUTE MAXIMUM RATINGS Parameter Storage Temperature Case Operating Temperature Lead Solder Temperature Power Supply Voltage Incident Optical Power Rating -40 to +85C -40 to +85C 260C, 10 sec. -0.5V to 3.8V 0 dBm average, +4 dBm peak Preliminary HFD3041-103 NOTICE Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability. www..com ELECTRO-OPTICAL CHARACTERISTICS (Vcc=3.3V, AC coupled to 50, 0C 8. Parameters Active Area Input Optical Wavelength Responsivity Differential Output Voltage Swing Supply Current -3dB Optical/Electrical Bandwidth Low Frequency -3dB Cutoff RMS Input Referred Noise Equivalent Power Power Supply Rejection Ratio Pulse Width Distortion Rise/Fall Time AGC Threshold Power Min. 1200 1.3 0.10 Typ. 40 1310 2.7 0.20 25 2.0 Max. 1600 4.2 Units m nm mV/W V Notes 1,2,7 1.6 40 2.5 0 mA GHz KHz W dB 1 1,3 1,3 4 1,8 1,5 1,6,7 9 0.50 30 0.65 105 130 70 60 170 ps ps W Notes: 1. 2. PR is the average optical power incident on the component window, subject to note 7. Responsivity measured with source wavelength of 1310nm, with light source modulated at 250MHz. Peak received optical power 5. 6. NOTICE The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESD-induced damage and/or degradation to equipment, take normal ESD precautions when handling this product 7. Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com 2 Honeywell * VCSEL Products Division Preliminary For application help: call 1-800-537-6945 Fiber Optic LAN Components PIN Plus Preamplifier FIGURE 1: INTERNAL SCHEMATIC DIAGRAM OF THE HFD3381-102 Vcc 50 100pF 270 Autom atic Gain Control 50 Data www..com Preliminary HFD3041-103 300pF Data Case Ground FIGURE 2: RECOMMENDED INTERFACE CIRCUIT FOR THE HFD3381-102 HFD30XX HFD31XX HFD33XX VCC 10nF Case Ground Data 50 T-Lines Data Vcc 10 Limiting Amplifier 22nF 100 or Test Equipment Note: 100 terminating resistor is optional R=10= C1 = 10 nF C2 = Data rate dependant (22nF for rates > 1Gbps) Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com For application help: call 1-800-537-6945 Preliminary Honeywell * VCSEL Products Division 3 Fiber Optic LAN Components PIN Plus Preamplifier ORDER GUIDE Catalog Listing HFD3041-103 Description PIN Plus Preamplifier, TO-46 Component Preliminary HFD3041-103 SALES AND SERVICE MICRO SWITCH Sensing and Control serves its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact a nearby sales office or call: TELEPHONE 1-800-367-6786 (USA) 1-800-737-3360 (Canada) +49 (0) 89 35813310 (Germany) +65-580-3312 (Singapore) +44 (0) 118 981 9511 (UK) MOUNTING DIMENSIONS (for reference only) in./(mm) www..com FAX 1-972-470-4326 (Customer Response Center) 1-972-470-4549 (Fax on demand) +49 (0) 89 3599971 (Germany) +65 445 3033 (Singapore) +44 (0) 118 981 7513 (UK) PINOUT Number 1 2 3 4 Function VCC Inverted Output Ground Non-Inverted Output INTERNET http://www.honeywell.com/VCSEL vcsel@honeywell.com WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Commencing with the date of shipment, Honeywell's warranty runs for 18 months. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. While we provide application assistance, personally and through our literature, it is up to the customer to determine the suitability of the product in the application. Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. Preliminary VCSEL Products Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 Printed with Soy Ink on 50% Recycled Paper 006697-1-EN IL50 GLO 797 Printed in USA 03/07/02 VCSEL Products Honeywell Inc. Optoelectronics Facility 830 East Arapaho Road Richardson, Texas 75081 Honeywell Control Systems Ltd. Zodiac House Calleva Park Aldermaston, Berkshire RG7 8HW England Helping You Control Your World Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components PIN Plus Preamplifier FEATURES * Pre-aligned LC SFF Connector sleeve * PIN detector and preamplifier in a TO-46 hermetic package * Data rates from DC to 2.5 Gbps * InGaAs PIN detector and BiCMOS preamplifier www..comOperation at 3.3V * * Differential output for low noise Preliminary HFD3141-102 The HFD3141-102 is a high-performance 1300nm integrated InGaAs detector (80micron active area) and pre-amplifier in a pre-aligned LC SFF connector for single mode applications. The product is designed for ease of use in modules designed for 2.5GB/s data rate. The HFD3141-102 converts optical power into a differential output electrical signal that is used in fiber optic communications and other applications. As the light increases, the differential output voltage increases. Above peak optical powers of approximately -11.5dBm, AGC circuitry in the TIA limits the optical voltage swings. The differential output is designed to be AC coupled to a 50 ohm load impedance pulled down to ground prior to any post amplification stages. To achieve the full-specified operational bandwidth, it is recommended that the products component leads at attached to within 0.10" of the receptacle with a controlled impedance path. The Honeywell HFD3141-102 is designed to interface with single mode fiber. Honeywell VCSEL Products Preliminary Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components PIN Plus Preamplifier ABSOLUTE MAXIMUM RATINGS Parameter Storage Temperature Case Operating Temperature Lead Solder Temperature Power Supply Voltage Incident Optical Power Rating -40 to +85C -40 to +85C 260C, 10 sec. -0.5V to 3.8V 0 dBm average, +4 dBm peak Preliminary HFD3141-102 NOTICE Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability. www..com ELECTRO-OPTICAL CHARACTERISTICS (Vcc=3.3V, AC coupled to 50, 0C 8. Parameters Active Area Input Optical Wavelength Responsivity Differential Output Voltage Swing Supply Current -3dB Optical/Electrical Bandwidth Low Frequency -3dB Cutoff RMS Input Referred Noise Equivalent Power Power Supply Rejection Ratio Sensitivity Pulse Width Distortion Rise/Fall Time AGC Threshold Power Min. 1200 1.1 0.10 Typ. 80 1310 2.3 0.20 25 1.8 Max. 1600 3.8 Units m nm mV/W V Notes 1 1,2 1.6 40 2.5 0 mA GHz KHz W dB dB ps ps W 1 1,3 1,3 4 1,7 0.50 30 0.65 105 130 75 60 170 1,5 1,6 8 Notes: 1. 2. PR is the average optical power incident on the receptacle. Responsivity measured with source wavelength of 1310nm, with light source modulated at 250MHz. Peak received optical power 9. 5. 6. NOTICE The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESD-induced damage and/or degradation to equipment, take normal ESD precautions when handling this product 7. Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com 2 Honeywell * VCSEL Products Division Preliminary For application help: call 1-800-537-6945 Fiber Optic LAN Components PIN Plus Preamplifier FIGURE 1: INTERNAL SCHEMATIC DIAGRAM OF THE HFD3141-102 Vcc 50 100pF 270 Autom atic Gain Control 50 Data www..com Preliminary HFD3141-102 300pF Data Case Ground FIGURE 2: RECOMMENDED INTERFACE CIRCUIT FOR THE HFD3141-102 HFD30XX HFD31XX HFD33XX VCC 10nF Case Ground Data 50 T-Lines Data Vcc 10 Limiting Amplifier 22nF 100 or Test Equipment Note: 100 terminating resistor is optional R=10= C1 = 10 nF C2 = Data rate dependant (22nF for rates > 1Gbps) Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com For application help: call 1-800-537-6945 Preliminary Honeywell * VCSEL Products Division 3 Fiber Optic LAN Components PIN Plus Preamplifier ORDER GUIDE Catalog Listing HFD3141-102 Description PIN Plus Preamplifier, LC connectorized Preliminary HFD3141-102 SALES AND SERVICE MICRO SWITCH Sensing and Control serves its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact a nearby sales office or call: TELEPHONE 1-800-367-6786 (USA) 1-800-737-3360 (Canada) +49 (0) 89 35813310 (Germany) +65-580-3312 (Singapore) +44 (0) 118 981 9511 (UK) MOUNTING DIMENSIONS (for reference only) in./(mm) www..com PINOUT Number 1 2 3 4 Function VCC Inverted Output Ground Non-Inverted Output FAX 1-972-470-4326 (Customer Response Center) 1-972-470-4549 (Fax on demand) +49 (0) 89 3599971 (Germany) +65 445 3033 (Singapore) +44 (0) 118 981 7513 (UK) INTERNET http://www.honeywell.com/VCSEL vcsel@honeywell.com WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Commencing with the date of shipment, Honeywell's warranty runs for 18 months. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. While we provide application assistance, personally and through our literature, it is up to the customer to determine the suitability of the product in the application. Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. Preliminary VCSEL Products Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 Printed with Soy Ink on 50% Recycled Paper 006697-1-EN IL50 GLO 797 Printed in USA 05/10/02 VCSEL Products Honeywell Inc. Optoelectronics Facility 830 East Arapaho Road Richardson, Texas 75081 Honeywell Control Systems Ltd. Zodiac House Calleva Park Aldermaston, Berkshire RG7 8HW England Helping You Control Your World Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components PIN Plus Preamplifier FEATURES * Pre-aligned LC SFF Connector sleeve * PIN detector and preamplifier in a TO-46 hermetic package * Data rates from DC to 2.5 Gbps * InGaAs PIN detector and BiCMOS preamplifier www..comOperation at 3.3V * * Differential output for low noise * 2.3GHz typical Bandwidth Preliminary HFD3141-103 The HFD3141-103 is a high-performance 1300nm integrated InGaAs detector (40micron active area) and pre-amplifier in a pre-aligned LC SFF connector for single mode applications. The product is designed for ease of use in modules designed for 2.5GB/s data rate. The HFD3141-103 converts optical power into a differential output electrical signal that is used in fiber optic communications and other applications. As the light increases, the differential output voltage increases. Above peak optical powers of approximately -11.5dBm, AGC circuitry in the TIA limits the optical voltage swings. The differential output is designed to be AC coupled to a 50 ohm load impedance pulled down to ground prior to any post amplification stages. To achieve the full-specified operational bandwidth, it is recommended that the products component leads at attached to within 0.10" of the receptacle with a controlled impedance path. The Honeywell HFD3141-103 is designed to interface with single mode fiber. Honeywell VCSEL Products Preliminary Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components PIN Plus Preamplifier ABSOLUTE MAXIMUM RATINGS Parameter Storage Temperature Case Operating Temperature Lead Solder Temperature Power Supply Voltage Incident Optical Power Rating -40 to +85C -40 to +85C 260C, 10 sec. -0.5V to 3.8V 0 dBm average, +4 dBm peak Preliminary HFD3141-103 NOTICE Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability. www..com ELECTRO-OPTICAL CHARACTERISTICS (Vcc=3.3V, AC coupled to 50, 0C Parameters Active Area Input Optical Wavelength Responsivity Differential Output Voltage Swing Supply Current -3dB Optical/Electrical Bandwidth Low Frequency -3dB Cutoff RMS Input Referred Noise Equivalent Power Power Supply Rejection Ratio Sensitivity Pulse Width Distortion Rise/Fall Time AGC Threshold Power 1.6 Notes: 1. 2. PR is the average optical power incident on the receptacle. Responsivity measured with source wavelength of 1310nm, with light source modulated at 250MHz. Peak received optical power 5. 6. NOTICE The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESD-induced damage and/or degradation to equipment, take normal ESD precautions when handling this product 7. 8. Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com 2 Honeywell * VCSEL Products Division Preliminary For application help: call 1-800-537-6945 Fiber Optic LAN Components PIN Plus Preamplifier FIGURE 1: INTERNAL SCHEMATIC DIAGRAM OF THE HFD3141-103 Vcc 50 100pF 270 Autom atic Gain Control 50 Data www..com Preliminary HFD3141-103 300pF Data Case Ground FIGURE 2: RECOMMENDED INTERFACE CIRCUIT FOR THE HFD3141-103 HFD30XX HFD31XX HFD33XX VCC 10nF Case Ground Data 50 T-Lines Data Vcc 10 Limiting Amplifier 22nF 100 or Test Equipment Note: 100 terminating resistor is optional R=10= C1 = 10 nF C2 = Data rate dependant (22nF for rates > 1Gbps) Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com For application help: call 1-800-537-6945 Preliminary Honeywell * VCSEL Products Division 3 Fiber Optic LAN Components PIN Plus Preamplifier ORDER GUIDE Catalog Listing HFD3141-103 Description PIN Plus Preamplifier, LC connectorized Preliminary HFD3141-103 SALES AND SERVICE MICRO SWITCH Sensing and Control serves its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact a nearby sales office or call: TELEPHONE 1-800-367-6786 (USA) 1-800-737-3360 (Canada) +49 (0) 89 35813310 (Germany) +65-580-3312 (Singapore) +44 (0) 118 981 9511 (UK) MOUNTING DIMENSIONS (for reference only) in./(mm) www..com PINOUT Number 1 2 3 4 Function VCC Inverted Output Ground Non-Inverted Output FAX 1-972-470-4326 (Customer Response Center) 1-972-470-4549 (Fax on demand) +49 (0) 89 3599971 (Germany) +65 445 3033 (Singapore) +44 (0) 118 981 7513 (UK) INTERNET http://www.honeywell.com/VCSEL vcsel@honeywell.com WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Commencing with the date of shipment, Honeywell's warranty runs for 18 months. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. While we provide application assistance, personally and through our literature, it is up to the customer to determine the suitability of the product in the application. Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. Preliminary VCSEL Products Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 Printed with Soy Ink on 50% Recycled Paper 006697-1-EN IL50 GLO 797 Printed in USA 05/10/02 VCSEL Products Honeywell Inc. Optoelectronics Facility 830 East Arapaho Road Richardson, Texas 75081 Honeywell Control Systems Ltd. Zodiac House Calleva Park Aldermaston, Berkshire RG7 8HW England Helping You Control Your World Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components Connectorized PIN Plus Preamplifier FEATURES * Prealigned LC SFF Connector sleeve * Data rates > 1GHz * PIN detector and preamplifier in a TO-46 heremtic package * 5V or 3.3V operation * GaAs PIN detector and www..comBiCMOS preamplifier * Differential Output for low noise * 1.1GHz Typical Bandwidth HFD3180-002 The HFD3180-002 is a high-performance 850nm GaAs detector and preamplifier packaged for high-speed data communications. The product is designed for ease of use by the module designer or manufacturer in IEEE 802.3z (1.25Gbps Ethernet), ANSI 10625 (1.062 Gbps Fibre Channel) and ATM XXX, (622Mbps) communications standards. The HFD3180-002 converts optical power into an electrical signal that is used in fiber optic communications and other applications. As the light increases, the output voltage increases, limiting at input powers above -10dBm. The differential output is designed to be AC coupled into a data amplifier. The pre-aligned and lensed package with an industry standard LC SFF style connector sleeve, allows for "drop in" assembly to reduce manufacturing cost. The Honeywell HFD3180-002 is designed to interface with 50/125 and 62.5/125mm multimode fiber. Honeywell Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components Connectorized PIN Plus Preamplifier ABSOLUTE MAXIMUM RATINGS Parameter Storage Temperature Case Operating Temperature Lead Solder Temperature Power Supply Voltage Incident Optical Power Rating -40 to +85C 0 to +70C 260C, 10 sec. -0.5 to 6 V 0 dBm average, +4 dBm peak HFD3180-002 NOTICE Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability. www..com ELECTRO-OPTICAL CHARACTERISTICS (Vcc=3.3V, 0C Parameters Supply Voltage Supply Current Output Offset Voltage Output Resistance Responsivity Differential Output Voltage Upper 3dB Bandwidth RMS Output Referred Noise Sensitivity Power Supply Rejection Ratio Pulse Width Distortion Rise/Fall Time Spectral Responsivity AGCth threshold power 35 50 3500 170 1100 1.67 -24 30 6 7 8 9,10 760 850 60 Notes: 1. 2. 3. Pin refers to the peak optical power at the face of the fiber optic cable input to the HFD3180-102. Responsivity measured with source wavelength of 850nm, freq = 0Hz, Pin< AGCth, Rload=50, sample tested at 2.5Gbps The output voltage increases as received light power increases, up to approximately -15dBm depending upon the AGCth. The preamplifier is designed to limit the electrical output signal above this optical input level, and does not introduce signal distortion until the average input power exceeds 0dBm. Bandwidth is measured with a small signal sinusoidal light source with 50 W average power, Rload=50. RMS input referred optical noise is sample tested by measuring the RMS output referred noise, then dividing by the responsivity. PSRR is sample tested from 300KHz to 1GHz by injecting a - 20dB electrical signal on the Vcc pin. The nominal value at 100MHz is recorded. No external bypass components are assumed. An external Vcc filter network will greatly increase the PSRR. 7. Sample tested at the 50% level of output pulses. 8. Rise and fall times are sample tested with source wavelength of 850nm, 125MHz square wave, with optical rise and fall times < 200ps, Pin< AGCth, Rload=50. Measured at 20% - 80% signal levels 9. Output offset voltage is defined as Vout - VoutQ with no light 10. The AGCth power depends on the offset voltage. Refer to fig 3. 4. 5. 6. NOTICE The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESDinduced damage and/or degradation to equipment, take normal ESD precautions when handling this product Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com 2 Honeywell * For application help: call 1-800-537-6945 Fiber Optic LAN Components Connectorized PIN Plus Preamplifier FIGURE 1: INTERNAL SCHEMATIC DIAGRAM OF THE HFD3180-002 Vcc 50 300pF 270 Automatic Gain Control 50 Data 100pF Data HFD3180-002 www..com Case Ground FIGURE 2: RECOMMENDED INTERFACE CIRCUIT FOR THE HFD3180-002 HFD30XX HFD31XX HFD33XX VCC 10nF Case Ground Data 50 T-Lines Data 22nF 100 Limiting Amplifier or Vcc 10 Test Equipment Note: 100 terminating resistor is optional R=10= C1 = 10 nF C2 = Data rate dependant (22nF for rates > 1Gbps FIGURE 3: AGC THRESHOLD POWER VS. OUTPUT OFFSET VOLTAGE HFD3180-002 Responsvity vs. Temperature 4.0 3.9 3.8 Responsivity (mV/uW) 3.7 3.6 3.5 3.4 3.3 3.2 3.1 3.0 0 10 20 30 40 50 60 70 80 90 100 Tem perature (C) 3.3V 5V Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com For application help: call 1-800-537-6945 Honeywell * 3 Fiber Optic LAN Components Connectorized PIN Plus Preamplifier ORDER GUIDE Catalog Listing HFD3180-002 Description Connectorized PIN Plus Preamplifier HFD3180-002 SALES AND SERVICE MICRO SWITCH Sensing and Control serves its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact a nearby sales office or call: TELEPHONE 1-800-367-6786 (USA) 1-800-737-3360 (Canada) +49 (0) 89 35813310 (Germany) +65-580-3312 (Singapore) +44 (0) 118 981 9511 (UK) MOUNTING DIMENSIONS (for reference only) in./(mm) www..com PINOUT Number 1 2 3 4 Function VCC Inverted Output Ground Non Inverted Output FAX 1-972-470-4326 (Customer Response Center) 1-972-470-4549 (Fax on demand) +49 (0) 89 3599971 (Germany) +65 445 3033 (Singapore) +44 (0) 118 981 7513 (UK) INTERNET http://www.honeywell.com/VCSEL VCSEL@HONEYWELL.COM WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Commencing with the date of shipment, Honeywell's warranty runs for 18 months. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. While we provide application assistance, personally and through our literature, it is up to the customer to determine the suitability of the product in the application. Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. 02/01/02 Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 Printed with Soy Ink on 50% Recycled Paper 006697-1-EN IL50 GLO 797 Printed in USA Honeywell Inc. Optoelectronics Facility 830 East Arapaho Road Richardson, Texas 75081 Honeywell Control Systems Ltd. Zodiac House Calleva Park Aldermaston, Berkshire RG7 8HW England Helping You Control Your World Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components Connectorized PIN Plus Preamplifier Future Dimension (available starting late February 2002) HFD3180-002 www..com Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com PK XXXX X DMM Printed in USA Fiber Optic LAN Components Connectorized PIN Plus Preamplifier FEATURES * Prealigned SC Connector sleeve * Data rates > 1GHz * PIN detector and preamplifier in a TO-46 heremtic package * 5V or 3.3V operation * GaAs PIN detector and BiCMOS preamplifier www..comDifferential Output for low noise * * 1.1GHz Typical Bandwidth HFD3381-002 The HFD3381-002 is a high-performance 850nm GaAs detector and preamplifier packaged for high-speed data communications. The product is designed for ease of use by the module designer or manufacturer in IEEE 802.3z (1.25Gbps Ethernet), ANSI 10625 (1.062 Gbps Fibre Channel) and ATM XXX, (622Mbps) communications standards. The HFD3381-002 converts optical power into an electrical signal that is used in fiber optic communications and other applications. As the light increases, the output voltage increases, limiting at input powers above -10dBm. The differential output is designed to be AC coupled into a data amplifier. The pre-aligned and lensed package with an industry standard SC style connector sleeve, allows for "drop in" assembly to reduce manufacturing cost. The Honeywell HFD3381-002 is designed to interface with 50/125 and 62.5/125mm multimode fiber. Honeywell Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com Fiber Optic LAN Components Connectorized PIN Plus Preamplifier ABSOLUTE MAXIMUM RATINGS Parameter Storage Temperature Case Operating Temperature Lead Solder Temperature Power Supply Voltage Incident Optical Power Rating -40 to +85C 0 to +70C 260C, 10 sec. -0.5 to 6 V 0 dBm average, +4 dBm peak HFD3381-002 NOTICE Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability. www..com ELECTRO-OPTICAL CHARACTERISTICS (Vcc=3.3V, 0C Parameters Supply Voltage Supply Current Output Offset Voltage Output Resistance Responsivity Differential Output Voltage Upper 3dB Bandwidth RMS Output Referred Noise Sensitivity Power Supply Rejection Ratio Pulse Width Distortion Rise/Fall Time Spectral Responsivity AGCth threshold power 35 50 3500 170 1100 1.67 -24 30 6 7 8 9,10 760 850 60 Notes: 1. 2. 3. Pin refers to the peak optical power at the face of the fiber optic cable input to the HFD3180-102. Responsivity measured with source wavelength of 850nm, freq = 0Hz, Pin< AGCth, Rload=50, sample tested at 2.5Gbps The output voltage increases as received light power increases, up to approximately -15dBm depending upon the AGCth. The preamplifier is designed to limit the electrical output signal above this optical input level, and does not introduce signal distortion until the average input power exceeds 0dBm. Bandwidth is measured with a small signal sinusoidal light source with 50 W average power, Rload=50. RMS input referred optical noise is sample tested by measuring the RMS output referred noise, then dividing by the responsivity. PSRR is sample tested from 300KHz to 1GHz by injecting a - 20dB electrical signal on the Vcc pin. The nominal value at 100MHz is recorded. No external bypass components are 7. 8. assumed. An external Vcc filter network will greatly increase the PSRR. Sample tested at the 50% level of output pulses. Rise and fall times are sample tested with source wavelength of 850nm, 125MHz square wave, with optical rise and fall times < 200ps, Pin< AGCth, Rload=50. Measured at 20% - 80% signal levels Output offset voltage is defined as Vout - VoutQ with no light 9. 4. 5. 6. 10. The AGCth power depends on the offset voltage. Refer to fig 3. NOTICE The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESDinduced damage and/or degradation to equipment, take normal ESD precautions when handling this product Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com 2 Honeywell * For application help: call 1-800-537-6945 Fiber Optic LAN Components Connectorized PIN Plus Preamplifier FIGURE 1: INTERNAL SCHEMATIC DIAGRAM OF THE HFD3381-002 Vcc 50 300pF 270 Automatic Gain Control 50 Data 100pF Data HFD3381-002 www..com Case Ground FIGURE 2: RECOMMENDED INTERFACE CIRCUIT FOR THE HFD3381-002 HFD30XX HFD31XX HFD33XX VCC 10nF Case Ground Data 50 T-Lines Data 22nF 100 Limiting Amplifier or Vcc 10 Test Equipment Note: 100 terminating resistor is optional R=10= C1 = 10 nF C2 = Data rate dependant (22nF for rates > 1Gbps FIGURE 3: AGC THRESHOLD POWER VS. OUTPUT OFFSET VOLTAGE HFD3381-002 Responsvity vs.Temperature 4.0 3.9 3.8 Re 3.7 sp on 3.6 siv ity 3.5 (m V/ 3.4 u 3.3 W) 3.2 3.1 3.0 0 10 20 30 40 50 60 70 80 90 100 Temperature 3.3V 5V Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com For application help: call 1-800-537-6945 Honeywell * 3 Fiber Optic LAN Components Connectorized PIN Plus Preamplifier ORDER GUIDE Catalog Listing HFD3381-002 Description Connectorized PIN Plus Preamplifier HFD3381-002 SALES AND SERVICE MICRO SWITCH Sensing and Control serves its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact a nearby sales office or call: TELEPHONE 1-800-367-6786 (USA) 1-800-737-3360 (Canada) +49 (0) 89 35813310 (Germany) +65-580-3312 (Singapore) +44 (0) 118 981 9511 (UK) MOUNTING DIMENSIONS (for reference only) in./(mm) www..com PINOUT Number 1* 2 3 4 Function VCC Inverted Output Ground Non Inverted Output FAX 1-972-470-4326 (Customer Response Center) 1-972-470-4549 (Fax on demand) +49 (0) 89 3599971 (Germany) +65 445 3033 (Singapore) +44 (0) 118 981 7513 (UK) INTERNET http://www.honeywell.com/VCSEL VCSEL@HONEYWELL.COM Aligned with the Receptacle notch VCC is cut shorter. WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Commencing with the date of shipment, Honeywell's warranty runs for 18 months. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. While we provide application assistance, personally and through our literature, it is up to the customer to determine the suitability of the product in the application. Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. 01/31/02 Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 Printed with Soy Ink on 50% Recycled Paper 006697-1-EN IL50 GLO 797 Printed in USA Honeywell Inc. Optoelectronics Facility 830 East Arapaho Road Richardson, Texas 75081 Honeywell Control Systems Ltd. Zodiac House Calleva Park Aldermaston, Berkshire RG7 8HW England Helping You Control Your World Courtesy of Steven Engineering, Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com |
Price & Availability of HFE4080-321
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |